Trade Compliance Nerd

    Canada

    Trade Nerd

    Along with Mexico, articles of Canadian origin were subject to a tariff that encompassed Liberation Day and Retaliatory Tariffs based on Synthetic Opioid and Border Issues that were declared National Emergencies. This rate currently sits at 35%.

    Unlike Mexico, Canada has multiple exemptions, including USMCA, potash, and a list of energy focused commodities subject to a preferred rate of 10% instead of 35%.

    Country Specific Tariff Rate= 35%

    If on the below Canadian Energy & Energy Resource List = 10%

    CommodityHarmonized Tariff ScheduleHTS Description
    Graphite2504105000Natural Graphite In Powder Or Flakes, Nesoi (kg)
    Graphite2504900000Natural Graphite Except Powder Or Flakes (kg)
    Barite2511105000Natural Barium Sulfate (barytes) Except Ground (t)
    Fluorspar2529210000Fluorspar Contng By Wt Lt=97% Calcium Fluoride (t)
    Fluorspar2529220000Fluorspar Contng By Wt Gt 97% Calcium Fluoride (t)
    Fluorspar2530901000Natural Cryolite; Natural Chiolite (t)
    Manganese2602000040Manganese Ores & Concentrates Lt 47% Dry Wt Mn (kg)
    Manganese2602000060Manganese Ores & Concentrates Gt=47% Dry Wt Mn (kg)
    Zinc2603000030Copper Ores And Concentrates: Zinc Content (ckg)
    Nickel2604000040Nickel Ores & Concentrates, Nickel Content (ckg)
    Cobalt2605000000Cobalt Ores And Concentrates (kg)
    Aluminum2606000030Bauxite, calcined refractory grade
    Aluminum2606000060Bauxite, calcined not refractory grade
    Aluminum2606000090Aluminum ores and concentrates not calcined bauxite
    Zinc2607000030Lead Ores And Concentrates: Zinc Content (ckg)
    Zinc2608000030Zinc Ores And Concentrates, Zinc Content (ckg)
    Tin2609000000Tin Ores And Concentrates (t)
    Chromium2610000020Chromium Ores & Concentrates, Lt=40% Chromic Oxide (t)
    Chromium2610000040Chrom Ores, Gt 40% But Lt 46% Chromic Oxide (t)
    Chromium2610000060Chromium Ores & Concentrates, Gt=46% Chromic Oxide (t)
    Tungsten2611003000Tungsten Ores (kg)
    Tungsten2611006000Tungsten Concentrates (kg)
    Uranium ores and concentrates2612100000Uranium ores and concentrates
    Thorium ores and concentrates2612200000 Thorium ores and concentrates
    Titanium2614003000Synthetic Rutile (kg)
    Titanium2614006020Ilmenite And Ilmenite Sand (kg)
    Titanium2614006040Titanium Ores And Concentrates, Nesoi (kg)
    Zirconium2615100000Zirconium Ores And Concentrates
    Niobium/Tantalum2615903000Synthetic Tantalum-niobium Concentrates (kg)
    Niobium2615906030Niobium (columbium) Ores And Concentrates (kg)
    Tantalum2615906060Tantalum Ores And Concentrates (kg)
    Vanadium2615906090Vanadium Ores And Concentrates (kg)
    Zinc2616100030Silver Ores And Concentrates: Zinc Content (ckg)
    Zinc2616900030Precious Metal Ores & Concen, Nesoi: Zinc Content (ckg)
    Antimony2617100000Antimony Ores And Concentrates (kg)
    Beryllium2617900030Beryllium Ores And Concentrates (kg)
    Zinc2620110000Hard Zinc Spelter (kg)
    Zinc2620193000Zinc Dross And Zinc Skimmings (kg)
    Zinc2620196030Ash/residues, Containing Mainly Zinc: Zinc Content (ckg)
    Zinc2620210030Leaded Gas Sludges & Anti-knock Comp, Zinc Cont (ckg)
    Zinc2620300030Ash/residues,contain Mainly Copper: Zinc Content (ckg)
    Vanadium2620400030Ash/residues (mainly Al), Vanadium Bearing Materls (kg)
    Antimony2620910000Ash/residues Contain Sb,be,cd,cr Or Their Mixtures (kg)
    Vanadium2620991000Ash & Residues Containing Mainly Vanadium (kg)
    Tungsten2620992000Ash And Residues Containing Mainly Tungsten (kg)
    Nickel2620993000Ash And Residues Nesoi Over 10 Percent Nickel (kg)
    Vanadium2620997520Vanadium-bearing Mats, Not Advances In Value, Etc (kg)
    Anthracite2701110000Anthracite
    Metallurgical coal2701120010Metallurgical coal
    Other2701120050Other
    Sub-bituminous coal2701190010Other coal: sub-bituminous coal
    Other2701190050Other
    Benzene2707100000Benzene
    Toluene2707200000Toluene
    m-Xylene2707300010m-Xylene
    o-Xylene2707300020o-Xylene
    p-Xylene2707300030p-Xylene
    Xylenes, other2707300040Xylenes: other
    Naphthalene2707400000Naphthalene
    Other aromatic hydrocarbon mixtures of which 65 percent or more by volume (including losses) distills at 250˚C by the ISO 3405 method (equivalent to the ASTM D 86 method2707500000Other aromatic hydrocarbon mixtures of which 65 percent or more by volume (including losses) distills at 250˚C by the ISO 3405 method (equivalent to the ASTM D 86 method
    Creosote oils2707910000Creosote oils
    Light oil2707991000Light oil
    Picolines2707992000Picolines
    Carbazole having a purity of 65 percent or more by weight2707994000Carbazole having a purity of 65 percent or more by weight
    Phenols: Containing more than 50 percent by weight of hydroxybenzene2707995100Phenols: Containing more than 50 percent by weight of hydroxybenzene
    Metacresol, orthocresol, paracresol and metaparacresol, all the foregoing having a purity of 75 percent or more by weight2707995500Metacresol, orthocresol, paracresol and metaparacresol, all the foregoing having a purity of 75 percent or more by weight
    Phenols: other2707995900Phenols: other
    Carbon black feedstocks2707999010Carbon black feedstocks
    Other2707999090Other
    Petroleum oils and oils obtained from bituminous minerals, crude testing under 25 degrees A.P.I.2709001000Petroleum oils and oils obtained from bituminous minerals, crude testing under 25 degrees A.P.I.
    Petroleum oils and oils obtained from bituminous minerals, crude testing 25 degrees A.P.I. or more, condensate derived wholly from natural gas2709002010Petroleum oils and oils obtained from bituminous minerals, crude testing 25 degrees A.P.I. or more, condensate derived wholly from natural gas
    Petroleum oils and oils obtained from bituminous minerals, crude testing 25 degrees A.P.I. or more, other2709002090Petroleum oils and oils obtained from bituminous minerals, crude testing 25 degrees A.P.I. or more, other
    Gasoline leaded2710121510Gasoline leaded
    Gasoline unleaded reformulated2710121514Gasoline unleaded reformulated
    Gasoline unleaded other2710121519Gasoline unleaded other
    Jet fuel, naphtha type2710121520Jet fuel, naphtha type
    Other2710121550Other
    Motor fuel blending stock Reformulated blendstock for oxygenate blending (RBOB)2710121805Motor fuel blending stock Reformulated blendstock for oxygenate blending (RBOB)
    other2710121890other
    Naphthas (except motor fuel or motor fuel blending stock)2710122500Naphthas (except motor fuel or motor fuel blending stock)
    Mixtures of hydrocarbons not elsewhere specified or included, which contain by weight not over 50 percent of any single hydrocarbon compound, insulatng of transformer oils2710124545Mixtures of hydrocarbons not elsewhere specified or included, which contain by weight not over 50 percent of any single hydrocarbon compound, insulatng of transformer oils
    Mixtures of hydrocarbons not elsewhere specified or included, which contain by weight not over 50 percent of any single hydrocarbon compound, Renewable fuel blends containing not less than 51 percent by voluem of biofuel, as described in statistical note 1 to this chapter2710124560Mixtures of hydrocarbons not elsewhere specified or included, which contain by weight not over 50 percent of any single hydrocarbon compound, Renewable fuel blends containing not less than 51 percent by voluem of biofuel, as described in statistical note 1 to this chapter
    Mixtures of hydrocarbons not elsewhere specified or included, which contain by weight not over 50 percent of any single hydrocarbon compound, other2710124595Mixtures of hydrocarbons not elsewhere specified or included, which contain by weight not over 50 percent of any single hydrocarbon compound, other
    Other2710129000Other
    Distillate and residual fuel oils (including blended fuel oils): Testing under 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of 45 seconds but not more than 125 seconds (NO. 4-type fuel oils): Containing not more than 500 ppm sulfur2710190605Distillate and residual fuel oils (including blended fuel oils): Testing under 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of 45 seconds but not more than 125 seconds (NO. 4-type fuel oils): Containing not more than 500 ppm sulfur
    Distillate and residual fuel oils (including blended fuel oils): Testing under 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of 45 seconds but not more than 125 seconds (NO. 4-type fuel oils): containing more than 500 ppm sulfur 2710190615Distillate and residual fuel oils (including blended fuel oils): Testing under 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of 45 seconds but not more than 125 seconds (NO. 4-type fuel oils): containing more than 500 ppm sulfur
    Distillate and residual fuel oils (including blended fuel oils): Testing under 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils): Fuel Oil NO. 52710190625Distillate and residual fuel oils (including blended fuel oils): Testing under 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils): Fuel Oil NO. 5
    Distillate and residual fuel oils (including blended fuel oils): Testing under 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils): Fuel Oil NO. 62710190630Distillate and residual fuel oils (including blended fuel oils): Testing under 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils): Fuel Oil NO. 6
    Distillate and residual fuel oils (including blended fuel oils): Testing under 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils): Other2710190635Distillate and residual fuel oils (including blended fuel oils): Testing under 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils): Other
    Distillate and residual fuel oils (including blended fuel oils): Testing under 25 degrees A.P.I. OTHER2710190650Distillate and residual fuel oils (including blended fuel oils): Testing under 25 degrees A.P.I. OTHER
    Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Fuel oils Nos 2 and 3: Diesel Oil :Containing not more than 15 ppm sulfur2710191102Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Fuel oils Nos 2 and 3: Diesel Oil :Containing not more than 15 ppm sulfur
    Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Fuel oils Nos 2 and 3: Diesel Oil :Containing more than 15 ppm sulfur but not more than 500 ppm sulfur2710191103Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Fuel oils Nos 2 and 3: Diesel Oil :Containing more than 15 ppm sulfur but not more than 500 ppm sulfur
    Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Fuel oils Nos 2 and 3: Diesel Oil :Containing more than 500 ppm sulfur2710191104Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Fuel oils Nos 2 and 3: Diesel Oil :Containing more than 500 ppm sulfur
    Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Fuel oils Nos 2 and 3: Other :Containing not more than 15 ppm sulfur2710191105Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Fuel oils Nos 2 and 3: Other :Containing not more than 15 ppm sulfur
    Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Fuel oils Nos 2 and 3: Other:Containing more than 15 ppm sulfur but not more than 500 ppm sulfur2710191107Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Fuel oils Nos 2 and 3: Other:Containing more than 15 ppm sulfur but not more than 500 ppm sulfur
    Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Fuel oils NO 2 and 3: Other :Containing more than 500 ppm sulfur2710191108Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Fuel oils NO 2 and 3: Other :Containing more than 500 ppm sulfur
    Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Other:Containing not more than 15 ppm sulfur2710191111Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Other:Containing not more than 15 ppm sulfur
    Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Other :Containing more than 15 ppm sulfur but not more than 500 ppm sulfur2710191113Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Other :Containing more than 15 ppm sulfur but not more than 500 ppm sulfur
    Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Other :Containing more than 500 ppm sulfur2710191114Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Other :Containing more than 500 ppm sulfur
    Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of 45 seconds or more but not more than 125 seconds (No 4 type fuel oils:Containing not more than 500 ppm sulfur2710191115Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of 45 seconds or more but not more than 125 seconds (No 4 type fuel oils:Containing not more than 500 ppm sulfur
    Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of 45 seconds or more but not more than 125 seconds (No 4 type fuel oils:Containing more than 500 ppm sulfur2710191125Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of 45 seconds or more but not more than 125 seconds (No 4 type fuel oils:Containing more than 500 ppm sulfur
    Distillate and residual fuel oils (including blended fuel oils): Testing 25 degrees A.P.I. or more; Having a Saybolt Universal Viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils)2710191150Distillate and residual fuel oils (including blended fuel oils): Testing 25 degrees A.P.I. or more; Having a Saybolt Universal Viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils)
    Kerosene-type jet fuel.2710191600Kerosene-type jet fuel.
    Kerosene (except kerosene-type jet fuel): Motor fuel2710192400Kerosene (except kerosene-type jet fuel): Motor fuel
    Kerosene (except kerosene-type jet fuel): Motor fuel blending stock2710192500Kerosene (except kerosene-type jet fuel): Motor fuel blending stock
    Kerosene (except kerosene-type jet fuel2710192600Kerosene (except kerosene-type jet fuel
    Aviation engine lubricating oils2710193010Aviation engine lubricating oils
    Automotive, diesel or marine engine lubricating oils2710193020Automotive, diesel or marine engine lubricating oils
    Turbine lubricating oil, including marine2710193030Turbine lubricating oil, including marine
    Automotive gear oils2710193040Automotive gear oils
    Steam cylinder oils2710193050Steam cylinder oils
    Quenching or cutting oils2710193070Quenching or cutting oils
    Other2710193080Other
    Greases: Containing not over 10 percent by weight of salts of fatty acids of animal (including marine animal) or vegetable origin2710193500Greases: Containing not over 10 percent by weight of salts of fatty acids of animal (including marine animal) or vegetable origin
    Other2710194000Other
    Mixtures of hydrocarbons not elsewhere specified or included, which contain by weight not over 50 percent of any single hydrocarbon compound: White Mineral oil: medicinal grade2710194530Mixtures of hydrocarbons not elsewhere specified or included, which contain by weight not over 50 percent of any single hydrocarbon compound: White Mineral oil: medicinal grade
    Mixtures of hydrocarbons not elsewhere specified or included, which contain by weight not over 50 percent of any single hydrocarbon compound: White Mineral oil: other2710194540Mixtures of hydrocarbons not elsewhere specified or included, which contain by weight not over 50 percent of any single hydrocarbon compound: White Mineral oil: other
    Mixtures of hydrocarbons not elsewhere specified or included, which contain by weight not over 50 percent of any single hydrocarbon compound: Insulating or transformer oils2710194545Mixtures of hydrocarbons not elsewhere specified or included, which contain by weight not over 50 percent of any single hydrocarbon compound: Insulating or transformer oils
    Mixtures of hydrocarbons not elsewhere specified or included, which contain by weight not over 50 percent of any single hydrocarbon compound: other2710194590Mixtures of hydrocarbons not elsewhere specified or included, which contain by weight not over 50 percent of any single hydrocarbon compound: other
    Other 2710199000Other
    Distillate and residual fuel oils (including blended fuel oils): Testing under 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of 45 seconds but not more than 125 seconds (NO. 4-type fuel oils)2710200510Distillate and residual fuel oils (including blended fuel oils): Testing under 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of 45 seconds but not more than 125 seconds (NO. 4-type fuel oils)
    Distillate and residual fuel oils (including blended fuel oils): Testing under 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils)2710200520Distillate and residual fuel oils (including blended fuel oils): Testing under 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils)
    Other2710200550Other
    Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Fuel oils Nos 2 and 3: Diesel Oil :Containing not more than 15 ppm sulfur2710201002Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Fuel oils Nos 2 and 3: Diesel Oil :Containing not more than 15 ppm sulfur
    Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Fuel oils Nos 2 and 3: Diesel Oil :Containing more than 15 ppm sulfur but not more than 500 ppm sulfur2710201003Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Fuel oils Nos 2 and 3: Diesel Oil :Containing more than 15 ppm sulfur but not more than 500 ppm sulfur
    Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Fuel oils Nos 2 and 3: Diesel Oil :Containing more than 500 ppm sulfur2710201004Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Fuel oils Nos 2 and 3: Diesel Oil :Containing more than 500 ppm sulfur
    Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Fuel oils Nos 2 and 3: Other :Containing not more than 15 ppm sulfur2710201005Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Fuel oils Nos 2 and 3: Other :Containing not more than 15 ppm sulfur
    Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Fuel oils Nos 2 and 3: Other:Containing more than 15 ppm sulfur but not more than 500 ppm sulfur2710201007Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Fuel oils Nos 2 and 3: Other:Containing more than 15 ppm sulfur but not more than 500 ppm sulfur
    Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Fuel oils NO 2 and 3: Other :Containing more than 500 ppm sulfur2710201008Distillate and residual fuel oils (including blended fuel oils): Testing over 25 degrees A.P.I. , having a Saybolt Universal Viscosity at 37.8˚C of less than 45 seconds (light fuel oils) Fuel oils NO 2 and 3: Other :Containing more than 500 ppm sulfur
    Other containing not more than 15 ppm sulfur2710201011Other containing not more than 15 ppm sulfur
    Other containing more than 15 ppm sulfur but not more than 500 ppm sulfur2710201013Other containing more than 15 ppm sulfur but not more than 500 ppm sulfur
    Other containing more than 500 ppm sulfur2710201014Other containing more than 500 ppm sulfur
    Having a Saybolt Universal Viscosity at 37.8˚C of more than 45 seconds but not more than 125 seconds containing not more than 500 ppm sulfur2710201015Having a Saybolt Universal Viscosity at 37.8˚C of more than 45 seconds but not more than 125 seconds containing not more than 500 ppm sulfur
    Having a Saybolt Universal Viscosity at 37.8˚C of more than 45 seconds but not more than 125 seconds containing more than 500 ppm sulfur2710201025Having a Saybolt Universal Viscosity at 37.8˚C of more than 45 seconds but not more than 125 seconds containing more than 500 ppm sulfur
    Having a Saybolt Universal Viscosity at 37.8˚C of more than 125 seconds2710201050Having a Saybolt Universal Viscosity at 37.8˚C of more than 125 seconds
    Kerosene-type jet fuel, motor fuel or motor fuel blending stock2710201500Kerosene-type jet fuel, motor fuel or motor fuel blending stock
    Kerosene (except kerosene-type jet fuel, motor fuel or motor fuel blending stock)2710202500Kerosene (except kerosene-type jet fuel, motor fuel or motor fuel blending stock)
    Waste oils: Containing polychlorinated biphenyls (PCBs)polychlorinated terphenyls (PCTs) or polybrominatedbiphenyls (PBBs): Containing PCBS at a concentration of 50mg/kg or more2710910010Waste oils: Containing polychlorinated biphenyls (PCBs)polychlorinated terphenyls (PCTs) or polybrominatedbiphenyls (PBBs): Containing PCBS at a concentration of 50mg/kg or more
    Waste oils: other: contining PCTS, PBBS, whether or not containing PCBs at a concentration level less than 50 mg/kg2710910050Waste oils: other: contining PCTS, PBBS, whether or not containing PCBs at a concentration level less than 50 mg/kg
    Wastes of distillate and residual fuel oils (whether or not blended: testing under 25 degrees API2710990500Wastes of distillate and residual fuel oils (whether or not blended: testing under 25 degrees API
    Wastes of distillate and residual fuel oils (whether or not blended: testing over 25 degrees API2710991000Wastes of distillate and residual fuel oils (whether or not blended: testing over 25 degrees API
    Wastes of motor fuel or of motor fuel blending stock2710991600Wastes of motor fuel or of motor fuel blending stock
    Wastes of kerosene or naphthas2710992100Wastes of kerosene or naphthas
    Wastes of lubricating oils2710993100Wastes of lubricating oils
    Wastes of greases: containing not over10 percent by weight of salts of fatty acids of animal or vegetable origin2710993200Wastes of greases: containing not over10 percent by weight of salts of fatty acids of animal or vegetable origin
    Wastes of greases: other2710993900Wastes of greases: other
    Mixtures of hydrocarbons not elsewhere specified or included, which contain not over 50 percent of any single hydrocarbon compound2710994500Mixtures of hydrocarbons not elsewhere specified or included, which contain not over 50 percent of any single hydrocarbon compound
    Other2710999000Other
    Liquefied Natural gas2711110000Liquefied Natural gas
    Liquefied Propane with a minimum purity of 90 liquid volume percent2711120010Liquefied Propane with a minimum purity of 90 liquid volume percent
    Liquefied Propane, other2711120020Propane, liquefied, other
    Liquiefied Butanes with a purity of 90 liquid volume percent or more, but less than 95 liquid volume percent2711130010Liquiefied Butanes with a purity of 90 liquid volume percent or more, but less than 95 liquid volume percent
    Liquefied Butanes, other2711130020Liquefied Butanes, other
    Ethylene2711140010Ethylene
    Propylene2711140020Propylene
    Butylene2711140030Butylene
    Butadiene2711140040Butadiene
    Ethane2711190010Ethane
    Other2711190020Other
    Gaseous state, Natural gas2711210000Gaseous state, Natural gas
    Gaseous state Propane with a minimum purity of 90 liquid volume percent2711290010Gaseous state Propane with a minimum purity of 90 liquid volume percent
    Gaseous state Propane, other2711290015Gaseous state Propane, other
    Gaseous state Butanes with a purity of 90 liquid volume percent or more, but less than 95 liquid volume percent2711290020Gaseous state Butanes with a purity of 90 liquid volume percent or more, but less than 95 liquid volume percent
    Gaseous state Butanes, other2711290025Gaseous state Butanes, other
    Other2711290060Other
    Tellurium2804500020Tellurium
    Arsenic2804800000Arsenic (kg)
    Lithium2805199010alkali metals or alkaline-earth metals, lithium
    Rare earths2805300005lanthanum, not intermixed or interalloyed
    Rare earths2805300010cerium, not intermixed or interalloyed
    Rare earths2805300015praseodymium, not intermixed or interalloyed
    Rare earths2805300020neodymium, not intermixed or interalloyed
    Rare earths2805300050rare earth metals nesoi, scandium and yttrium, not intermixed or interalloyed
    Rare earths2805300090rare earth metals nesoi, scandium and yttrium, intermixed or interalloyed
    Fluorspar2811110000Hydrogen Fluoride (hydrofluoric Acid) (kg)
    Arsenic2811191000Arsenic Acid (kg)
    Arsenic2811291000Arsenic Trioxide (kg)
    Arsenic2813901000Arsenic Sulfides (kg)
    Zinc2817000000Zinc Oxide And Zinc Peroxide (kg)
    Aluminum2818200000Aluminum Oxide, Except Artificial Corundum, Nesoi (kg)
    Aluminum2818300000Aluminum Hydroxide (kg)
    Chromium2819100000Chromium Trioxide (kg)
    Chromium2819900000Chromium Oxide & Hydride, Exc Chrom Trioxide,nesoi (kg)
    Manganese2820100000Manganese Dioxide (kg)
    Manganese2820900000Manganese Oxides, Except Manganese Dioxide, Nesoi (kg)
    Cobalt2822000010Cobalt(II, III) oxide (cobalt tetroxide) (kg)
    Cobalt2822000090Other , cobalt oxide and hydroxide (kg)
    Titanium2823000000Titanium Oxides (kg)
    Lithium2825200000Lithium Oxide And Hydroxide (kg)
    Vanadium2825300010Vanadium Pentoxide (anhydride) (kg)
    Vanadium2825300050Vanadium Oxide, Exc Vanadium Pentoxide, Nesoi (kg)
    Nickel2825400000Nickel Oxides And Hydroxides (kg)
    Germanium/Zirconium2825600000Germanium Oxides And Zirconium Dioxide (kg)
    Antimony2825800000Antimony Oxides (kg)
    Beryllium2825901000Beryllium Oxide And Hydroxide (kg)
    Niobium2825901500Niobium Oxide (kg)
    Tin2825902000Tin Oxides (kg)
    Tungsten2825903000Tungsten Oxides (kg)
    Fluorspar2826120000Fluorides Of Aluminum (kg)
    Fluorspar2826300000Sodium Hexafluoroaluminate (synthetic Cryolite) (t)
    Lithium2826909010fluoroaluminates and other complex fluorine salts, lithium hexafluorophosphate
    Nickel2827350000Nickel Chloride (kg)
    Vanadium2827391000Vanadium Chloride (kg)
    Tin2827392500Tin Chloride (kg)
    Tungsten2827394000Tungsten Chloride (kg)
    Cobalt2827396000Cobalt Chloride (kg)
    Zinc2827396500Zinc Chloride (kg)
    Vanadium2827491000Chloride Oxides And Chloride Hydroxide Of Vanadium (kg)
    Zinc2830901000Zinc Sulfide Lumin Grd Purity > 99.99% By Wt (kg)
    Zinc2830901500Zinc Sulfide, Nesoi (kg)
    Nickel2833240000Nickel Sulfate (kg)
    Barite2833270000Barium Sulfate (kg)
    Cobalt2833291000Cobalt Sulfate (kg)
    Vanadium2833293000Vanadium Sulfate (kg)
    Chromium2833294000Chromium Sulfate (kg)
    Zinc2833294500Zinc Sulfate (kg)
    Manganese2833295110other sulfates, of manganese (excluding cobalt, iron, vanadium, chromium & zinc)
    Bismuth2834290500Bismuth Nitrates (kg)
    Lithium2836910010Lithium Carbonates, U.S.P. Grade (kg)
    Lithium2836910050Lithium Carbonates, Except U.S.P. Grade, Nesoi (kg)
    Cobalt2836991000Cobalt Carbonates (kg)
    Bismuth2836992000Bismuth Carbonate (kg)
    Chromium2841300000Sodium Dichromate (kg)
    Chromium2841501000Potassium Dichromate (kg)
    Manganese2841610000Potassium Permanganate (kg)
    Manganese2841690010Sodium Permanganate (kg)
    Manganese2841690090Manganites, Manganates And Permanganates, Nesoi (kg)
    Tungsten2841800010Tungstates (wolframate) Of Ammonium (tungsten Cnt) (kg)
    Tungsten2841800020Tungstates (wolframates) Of Calcium (tungsten Cnt) (kg)
    Tungsten2841800050Tungstates (wolframates) (tungsten Cnt), Nesoi (kg)
    Vanadium2841901000Vanadates,(vanadium Content) (kg)
    Tin2841903000Potassium Stannate (kg)
    Uranium metal2844101000Uranium metal
    Uranium compounds; Oxide2844102010Uranium compounds; Oxide
    Uranium compounds; Hexafluoride2844102025Uranium compounds; Hexafluoride
    Gadolinium2844420000Actinium-225, actinium-227, californium-253, curium-240, curium-241, curium-242, curium-243, curium-244, einsteinium-253, einsteinium-254, gadolinium-148, polonium-208, polonium-209, polonium-210, radium-223, uranium-230 or uranium-232, and their compounds; alloys, dispersions (including cermets), ceramic products and mixtures containing these elements or compounds
    Cesium2844430021Americium-241, californium-252, cesium-137, gadolinium-153, idium-192, promethium-147, radium-226, selenium-75, or ytterbium-169
    Rare earths2846100010cerium oxides
    Rare earths2846100050cerium compounds other than cerium oxides
    Rare earths2846902005rare-earth oxides except cerium oxides containing lanthanum as the predominant metal
    Rare earths2846902015rare-earth oxides except cerium oxides mixture containing yttrium or scandium as the predominant metal
    Rare earths2846902040rare-earth oxides mixtures except cerium oxides, nesoi
    Rare earths2846902082rare earth chlorides mixtures except cerium chlorides containing yttrium or scandium as the predominant metal
    Rare earths2846902084mixtures of rare-earth, except cerium chlorides, nesoi
    Rare earths2846904000yttrium materials and compds containing by wt. gt 19% but lt 85% yttrium oxide equivalent
    Rare earths2846908070mixtures of rare-earth carbonates containing lanthanum as the predominant metal
    Rare earths2846908075mixtures of rare-earth carbonates other than of cerium carbonate or of lanthanum
    Rare earths2846908090compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium, or mixtures of these metals, nesoi
    Chromium2849902000Carbides, Chem Defined/not, Of Chromium (kg)
    Tungsten2849903000Carbides, Chem Defined/not, Of Tungsten (kg)
    Tungsten2850001000Hydrides & Nitrides, Chem Defined/nt, Of Tungsten (kg)
    Vanadium2850002000Hydrides & Nitrides, Chem Defined/nt, Of Vanadium (kg)
    Arsenic/Gallium2853909010Gallium arsenide wafers, undoped
    Cobalt2915293000Cobalt Acetates (kg)
    Zinc3206200030Zinc Yellow (kg)
    Zinc3206420000Lithopone & Oth Pigmts & Prep Based On Zinc Sulfid (kg)
    Rare earths3606903000ferrocerium and other pyrophoric alloys
    Graphite3801101000Artificial Graphite Plates Etc,for Elec Generators (kg)
    Graphite3801105010artificial graphite, surface-molded spherical graphite
    Graphite3801105090artificial graphite, nesoi
    Graphite3801200000Colloidal/semi-colloidal Graphite (kg)
    Graphite3801300000Carbonaceous Pastes For Electrodes&similar Pastes (kg)
    Graphite3801900000Preparations Based On Graphite, Nesoi (kg)
    Nickel3815110000Supported Catalysts W Nickel/nickel Compound Etc (kg)
    Arsenic/Gallium3818000010Gallium arsenide wafers, doped
    Bismuth3824993100Mixtures Of Bismuth (kg)
    Tungsten3824993500Mixtures Of Tungsten (tungsten Content) (kg)
    Vanadium3824993600Mixtures Of Vanadium (kg)
    Biodiesel not containing petroleum oils or oils obtained from bituminous materials (B100)3826001000Biodiesel not containing petroleum oils or oils obtained from bituminous materials (B100)
    Other 3826003000Other
    Graphite6815110000Nonelectrical Articles Of Graphite Or Carbon (kg)
    Graphite6815120000Nonelectrical Articles Of Graphite Or Carbon (kg)
    Graphite6815130000Nonelectrical Articles Of Graphite Or Carbon (kg)
    Graphite6815190000Nonelectrical Articles Of Graphite Or Carbon (kg)
    Platinum7110110010Grain And Nuggets Of The Metal Platinum
    Platinum7110110020Sponge Of The Metal Platinum
    Platinum7110110050Platinum Metal Unwrought Nesoi
    Platinum7110190000Platinum Metal Semimanufactured
    Palladium7110210000Palladium Unwrought Or In Powder Form
    Palladium7110290000Palladium Semimanufactured
    Rhodium7110310000Rhodium Unwrought Or In Powder Form
    Rhodium7110390000Rhodium Semimanufactured
    Iridium7110410010Iridium Unwrought Or In Powder Form Separately
    Ruthenium7110410030Ruthenium Unwrought Or In Powder Form Separately
    Ruthenium/Iridium7110410050Iridium Osmium And Ruthenium Unwrought Nesoi
    Iridium7110490010Iridium Seminanufactured
    Ruthenium7110490050Osmium And Ruthenium Semimanufactured
    Platinum7112920100Waste And Scrap Of Platinum Including Metal Clad With Platinum Excluding Sweepings Containing Other Precious Metals
    Platinum7115100000Catalysts Platinum In The Form Of Wire Cloth Or Grill
    Rubidium7115906000
    Platinum7118900020Platinum Coin
    Manganese7202111000Ferromanganese Ov 2 But Nov 4 Percent Carbon (kg)
    Manganese7202115000Ferromanganese Over 4 Percent Carbon (kg)
    Manganese7202191000Ferromanganese Not Over 1 Percent Carbon (kg)
    Manganese7202195000Ferromanganese Ov 1 But Nov 2 Percent Carbon (kg)
    Manganese7202300000Ferrosilicon Manganese (kg)
    Chromium7202410000Ferrochromium Over 4 Percent Carbon (kg)
    Chromium7202491000Ferrochromium Over 3 But Not Over 4 Percent Carbon (kg)
    Chromium7202495010Ferrochromium Containing >0.5% <=3% Carbon (kg)
    Chromium7202495090Ferrochromium Contain <=0.5% Carbon, Nesoi (kg)
    Chromium7202500000Ferrosilicon Chromium (kg)
    Nickel7202600000Ferronickel (kg)
    Tungsten7202800000Ferrotungsten And Ferrosilicon Tungsten
    Titanium7202910000Ferrotitanium And Ferrosilicon Titanium
    Vanadium7202920000Ferrovanadium (kg)
    Niobium7202934000Ferroniobium, Cont Lt 0.02 % P Or S Or Lt 0.4% Si (kg)
    Niobium7202938000Ferroniobium, Nesoi (kg)
    Zirconium7202991000Ferrozirconium
    Steel with critical mineral commodity alloying agent7204210000STAINLESS STEEL WASTE AND SCRAP
    Steel with critical mineral commodity alloying agent7204410020NO 1 BUNDLES STEEL SCRAP
    Steel with critical mineral commodity alloying agent7204410040NO 2 BUNDLES STEEL SCRAP
    Steel with critical mineral commodity alloying agent7204410060BORINGS, SHOVELINGS AND TURNINGS STEEL SCRAP
    Steel with critical mineral commodity alloying agent7204410080SHAVINGS, CHIPS, MILLING WASTE, SAWDUST, FILINGS, TRIMMINGS, STAMPINGS STEEL SCRAP
    Steel with critical mineral commodity alloying agent7204490020NO 1 HEAVY MELTING STEEL SCRAP
    Steel with critical mineral commodity alloying agent7204490040NO 2 HEAVY MELTING STEEL SCRAP
    Steel with critical mineral commodity alloying agent7204490060CUT PLATE AND STRUCTURAL STEEL SCRAP
    Steel with critical mineral commodity alloying agent7204490070SHREDDED STEEL SCRAP
    Steel with critical mineral commodity alloying agent7205100000GRANULES, IRON OR STEEL
    Steel with critical mineral commodity alloying agent7205290000POWDERS, IRON OR NONALLOY STEEL
    Steel with critical mineral commodity alloying agent7206100000IRON AND NONALLOY STEEL INGOTS
    Steel with critical mineral commodity alloying agent7206900000IRON AND NONALLOY STEEL, PRIMARY FORMS NOT INGOTS
    Steel with critical mineral commodity alloying agent7207110000SEMIFINISHED PRODUCTS OF IRON OR NONALLOY STEEL UNDER 0.25 PERCENT CARBON RECTANGULAR OR SQUARE CROSS-SECTION WIDTH LESS THAN TWICE THE THICKNESS
    Steel with critical mineral commodity alloying agent7207120010SEMIFINISHED PRODUCTS OF IRON OR NONALLOY STEEL UNDER 0.25 PERCENT CARBON RECTANGLR CROSS-SECTION WIDTH LESS THN 4 TIMES THE THICKNESS
    Steel with critical mineral commodity alloying agent7207120050SEMIFINISHED PRODUCTS OF IRON OR NONALLOY STEEL UNDER 0.25 PERCENT CARBON RECTANGULAR CROSS-SECTION WIDTH AT LEAST 4 TIMES THE THICKNESS
    Steel with critical mineral commodity alloying agent7207190030SEMIFINISHED PRODUCTS OF IRON OR NONALLOY STEEL UNDER 0.25 PERCENT CARBON CIRCULAR CROSS-SECTION
    Steel with critical mineral commodity alloying agent7207190090OTHER SEMIFINISHED PRODUCTS OF IRON OR NONALLOY STEEL UNDER 0.25 PERCENT CARBON, OTHER
    Steel with critical mineral commodity alloying agent7207200025SEMIFINISHED PRODUCTS OF IRON OR NONALLOY STEEL 0.25 PERCENT OR MORE CARBON RECTANGULAR OR SQUARE CROSS-SECTION WIDTH LESS THAN 4 TIMES THE THICKNESS
    Steel with critical mineral commodity alloying agent7207200045SEMIFINISHED PRODUCTS OF IRON OR NONALLOY STEEL 0.25 PERCENT OR MORE CARBON RECTANGULAR OR SQUARE CROSS-SECTION WIDTH AT LEAST 4 TIMES THE THICKNESS
    Steel with critical mineral commodity alloying agent7207200075SEMIFINISHED PRODUCTS OF IRON OR NONALLOY STEEL 0.25 PERCENT OR MORE CARBON CIRCULAR CROSS-SECTION
    Steel with critical mineral commodity alloying agent7207200090SEMIFINISHED PRODUCTS OF IRON OR NONALLOY STEEL 0.25 PERCENT OR MORE CARBON, CROSS-SECTION OTHER THAN CIRCULAR, RECTANGULAR OR SQUARE
    Steel with critical mineral commodity alloying agent7208101500FLAT-ROLLED IRON OR NONALLOY STEEL COILS, 600 MM OR MORE WIDE, HOT-ROLLED, NOT CLAD, PLATED OR COATED, PICKLED, WITH PATTERNS IN RELIEF
    Steel with critical mineral commodity alloying agent7208103000FLAT-ROLLED IRON OR NONALLOY STEEL, 600MM OR MORE WIDE, HOT-ROLLED, NOT CLAD, PLATED OR COATED, COILS, PATTERNS IN RELIEF, THICKNESS OF 4.75MM OR MORE
    Steel with critical mineral commodity alloying agent7208106000FLAT-ROLLED IRON OR NONALLOY STEEL, 600MM OR MORE WIDE, HOT-ROLLED, NOT CLAD, PLATED OR COATED, COILS, PATTERNS IN RELIEF, LESS THAN 4.75MM THICK
    Steel with critical mineral commodity alloying agent7208253000FLAT-ROLLED HIGH-STRENGH IRON OR NONALLOY STEEL COILS, 600 MM OR MORE WIDE, HOT-ROLLED, NOT CLAD, PLATED OR COATED, PICKLED, 4.75 MM OR MORE THICK
    Steel with critical mineral commodity alloying agent7208256000FLAT-ROLLED IRON OR NONALLOY STEEL COILS, NT HI-STR, 600 MM OR MORE WIDE, HOT-ROLLED, NOT CLAD, PLATED OR COATED, PICKLED, 4.75 MM OR MORE THICK
    Steel with critical mineral commodity alloying agent7208260030FLAT-ROLLED HIGH-STRENGTH STEEL OF A WIDTH >600 MM, IN COILS, NOT FURTHER WORKED THAN HOT-ROLLED, PICKLED, OF A THICKNESS >3 MM BUT < 4.75 MM
    Steel with critical mineral commodity alloying agent7208260060FLAT-ROLLED IRON OR NONALLOY STEEL COILS,NT HI-STR, 600 MM OR MORE WIDE,HOT-ROLLED,NOT CLAD,PLATED OR COATED,PICKLED,GT/=3 MM TO LT 4.75MM THICK
    Steel with critical mineral commodity alloying agent7208270040FLAT-ROLLED HIGH-STRENGTH STEEL OF A WIDTH >600 MM, IN COILS, NOT FURTHER WORKED THAN HOT-ROLLED, PICKLED, OF A THICKNESS <3 MM
    Steel with critical mineral commodity alloying agent7208270045FLAT-ROLLED HIGH-STRENGTH STEEL OF A WIDTH >600 MM, IN COILS, NOT FURTHER WORKED THAN HOT-ROLLED, PICKLED, OF A THICKNESS <3 MM
    Steel with critical mineral commodity alloying agent7208270060FLAT-ROLLED IRON OR NONALLOY STEEL COILS, EXCEPT HIGH-STRENGTH, 600MM OR MORE WIDE, HOT-ROLLED, NOT CLAD, PLATED OR COATED, PICKLED, UNDER 3 MM THICK
    Steel with critical mineral commodity alloying agent7208360030FLAT-ROLLED HIGH-STRENGTH IRON OR NONALLOY STEEL COILS, 600 MM OR MORE WIDE, HOT-ROLLED, NOT CLAD, PLATED OR COATED, NOT PICKLED, OVER 10 MM THICK
    Steel with critical mineral commodity alloying agent7208360060FLAT-ROLLED IRON OR NONALLOY STEEL COILS, EXC HIGH-STRENGTH, 600MM OR MORE WIDE, HOT-ROLLED, NOT CLAD, PLATED OR COATED, NOT PICKLED, OVER 10 MM THICK
    Steel with critical mineral commodity alloying agent7208370030FLAT-ROLLED HIGH-STRENGTH IRON OR NONALLOY STEEL COILS,600MM OR MORE WIDE,HOT-ROLLED,NOT CLAD,PLATED OR COATED,NOT PICKLED, >4.75MM TO <10MM THICK
    Steel with critical mineral commodity alloying agent7208370060FLAT-ROLLED IRON OR NONALLOY STEEL COILS,EX HI-STR,600MM OR MORE WIDE,HOT-ROLLED,NOT CLAD, PLATED OR COATED,NOT PICKLED,GT/=4.75MM TO LT 10 MM THK
    Steel with critical mineral commodity alloying agent7208380015FLAT-ROLLED HIGH-STRENGTH STEEL OF A WIDTH >600 MM, IN COILS, NOT FURTHER WORKED THAN HOT-ROLLED, OF A THICKNESS >3 MM BUT <4.75 MM
    Steel with critical mineral commodity alloying agent7208380030FLAT-ROLLED IRON OR NONALLOY STEEL, 600MM WIDE OR MORE HOT-ROLLED, NOT CLAD, PLATED OR COATED,IN COILS,3 LT 4.75MM THICK, NOT PICKLED, UNTRIMMED EDGES
    Steel with critical mineral commodity alloying agent7208380090FLAT-ROLLED IRON OR NONALLOY STEEL COILS 600MM OR MORE WIDE HOT-ROLLED NOT CLAD, PLATED OR COATED 3 LT 4.75MM THICK NOT PICKLED,OTHER THAN UNTRMD EDGE
    Steel with critical mineral commodity alloying agent7208390020FLAT-ROLLED HIGH-STRENGTH IRON OR NONALLOY STEEL COILS,600MM OR MORE WIDE,HOT-ROLLED,NOT CLAD, PLATED OR COATED,NOT PICKLED,LESS THAN 3 MM THICK
    Steel with critical mineral commodity alloying agent7208390025FLAT-ROLLED HIGH-STRENGTH IRON OR NONALLOY STEEL COILS,600MM OR MORE WIDE,HOT-ROLLED,NOT CLAD, PLATED OR COATED,NOT PICKLED,LESS THAN 3 MM THICK
    Steel with critical mineral commodity alloying agent7208390030FLAT-ROLLED IRON OR NONALLOY STEEL, 600MM OR MORE WIDE, IN COILS, HOT-ROLLED, NOT CLAD, PLATED OR COATED, UNDER 3MM THICK, NOT PICKLED UNTRIMMED EDGES
    Steel with critical mineral commodity alloying agent7208390090FLAT-ROLLED IRON OR NONALLOY STEEL, 600MM OR MORE WIDE, COILS, HOT-ROLLED, NOT CLAD, PLATED OR COATED, UNDER 3MM THICK, NOT PICKLED NOT UNTRMMED EDGES
    Steel with critical mineral commodity alloying agent7208403030FLAT-ROLLED IRON OR NONALLOY STEEL, 600MM OR MORE WIDE, HOT-ROLLED, NOT CLAD, PLATED OR COATED, NOT IN COILS, PATTERNS RELIEF, OVER 10MM THICK
    Steel with critical mineral commodity alloying agent7208403060FLAT-ROLLED IRON OR NONALLOY STEEL, 600MM OR MORE WIDE, HOT-ROLLED, NOT CLAD, PLATED OR COATED,NOT IN COILS,PATTERNS IN RELIEF,4.75MM LT 10MM THICK
    Steel with critical mineral commodity alloying agent7208406060FLAT-ROLLED IRON OR NONALLOY STEEL, 600MM OR MORE WIDE HOT-ROLLED, NOT CLAD, PLATED OR COATED, NOT COILED, PATTERNS IN RELIEF, 3 TO UNDER 4.75MM THCK
    Steel with critical mineral commodity alloying agent7208510030UNIVERSAL MILL PLATE, IRON OR NONALLOY STEEL, NOT COILS, 600 MM OR MORE WIDE, HOT-ROLLED, NOT CLAD, PLATED, COATED, OVER 10 MM THICK
    Steel with critical mineral commodity alloying agent7208510045FLAT-ROLLED HIGH STRENGTH STEEL, 600MM OR MORE WIDE, HOT-ROLLED, NOT CLAD, PLATED OR COATED, NOT COILED, OVER 10MM THICK
    Steel with critical mineral commodity alloying agent7208510060FLAT-ROLLED IRON OR NONALLOY STEEL, 600MM OR MORE WIDE, HOT-ROLLED, NOT CLAD, PLATED OR COATED, NOT IN COILS, OVER 10MM THICK
    Steel with critical mineral commodity alloying agent7208520000FLAT-ROLLED IRON OR NONALLOY STEEL,NOT COILS,600MM OR MORE WIDE,HOT-ROLLED,NOT CLAD,PLATED,COATED,GT/=4.75MM TO LT 10MM THICK
    Steel with critical mineral commodity alloying agent7208530000FLAT-ROLLED IRON OR NONALLOY STEEL, NOT COILS, 600 MM OR MORE WIDE, HOT-ROLLED, NOT CLAD, PLATED, COATED,GT/= 3 MM TO LT 4.75 MM THICK
    Steel with critical mineral commodity alloying agent7208540000FLAT-ROLLED IRON OR NONALLOY STEEL, NOT COILS, 600 MM OR MORE WIDE, HOT-ROLLED, NOT CLAD, PLATED, COATED, LESS THAN 3 MM THICK
    Steel with critical mineral commodity alloying agent7208900000FLAT-ROLLED IRON OR NONALLOY STEEL COILS OR NOT, 600MM OR MORE WIDE, HOT-ROLLED, NOT CLAD, PLATED OR COATED, NESOI
    Steel with critical mineral commodity alloying agent7209150000FLAT-ROLLED IRON OR NONALLOY STEEL COILS, 600MM OR MORE WIDE, COLD-ROLLED (COLD-REDUCED), 3MM (0.118 INCH) OR MORE THICK, NOT CLAD, PLATED OR COATED
    Steel with critical mineral commodity alloying agent7209160040FLAT-ROLLED HIGH-STRENGTH IRON OR NONALLOY STEEL COILS 600MM OR MORE WIDE COLD-ROLLED, NOT CLAD, PNTD OR COATED, OVER 1MM BUT LESS THAN 3MM ANNEALED
    Steel with critical mineral commodity alloying agent7209160045FLAT-ROLLED HIGH-STRENGTH IRON OR NONALLOY STEEL COILS 600MM OR MORE WIDE COLD-ROLLED, NOT CLAD, PNTD OR COATED, OVER 1MM BUT LESS THAN 3MM ANNEALED
    Steel with critical mineral commodity alloying agent7209160060FLAT-ROLLD HIGH-STRENGTH IRON OR NONALLOY STEEL COILS 600MM OR MORE WIDE COLD-ROLLD NOT CLAD, PNTD OR COATD, OVER 1MM BUT UNDER 3MM THICK NOT ANNEALED
    Steel with critical mineral commodity alloying agent7209160070FLAT-ROLLED IRON OR NONALLOY STEEL COILS 600MM OR MORE WIDE COLD-ROLLED NOT CLAD,PLATED OR COAT,OVER 1MM, LESS THAN 3MM THICK,EX HI-STRENGTH,ANNEALED
    Steel with critical mineral commodity alloying agent7209160091FLAT-ROLLED IRON OR NONALLOY STEEL COILS 600MM OR MORE WIDE COLD-ROLLED NOT CLAD,PLATED OR COATED,OVER 1MM BUT LESS THAN 3MM THICK,EX HI-STRENGTH
    Steel with critical mineral commodity alloying agent7209170040FLAT-ROLLD HIGH-STRENGTH IRON OR NONALLOY STEEL COILS 600MM OR MORE WIDE COLD-ROLLD NOT CLAD, PNTD OR COATD, 0.5MM BUT NOT OVER 1MM THICK ANNEALED
    Steel with critical mineral commodity alloying agent7209170045FLAT-ROLLD HIGH-STRENGTH IRON OR NONALLOY STEEL COILS 600MM OR MORE WIDE COLD-ROLLD NOT CLAD, PNTD OR COATD, 0.5MM BUT NOT OVER 1MM THICK ANNEALED
    Steel with critical mineral commodity alloying agent7209170060FLAT-ROLLD HIGH-STRENGTH IRON OR NONALLOY STEEL COILS 600MM OR MORE WIDE COLD-ROLLD NOT CLAD, PLTD OR COATD, 0.5MM BUT NOT OVER 1MM THICK NOT ANNEALED
    Steel with critical mineral commodity alloying agent7209170070FLAT-ROLLED IRON OR NONALLOY STEEL COILS 600MM OR MORE WIDE COLD-ROLLED NOT CLAD,PLATED OR COAT,0.5MM OR MORE,NOT OV 1MM THICK,EX HI-STRENGTH,ANNEALED
    Steel with critical mineral commodity alloying agent7209170091FLAT-ROLLED IRON OR NONALLOY STEEL COILS 600MM OR MORE WIDE COLD-ROLLED NOT CLAD,PLATED OR COATED,0.5MM OR MORE BUT NOT OVER 1MM THICK,EX HI-STRENGTH
    Steel with critical mineral commodity alloying agent7209181530FLAT-ROLLD HIGH-STRNGTH IRON OR NONALLOY STEEL COILS 600MM OR MORE WIDE COLD-ROLLED NOT CLAD, PLATED OR COATD, LESS THAN 0.5MM THICK ANNEALED
    Steel with critical mineral commodity alloying agent7209181560FLAT-ROLLD HIGH-STRNGTH IRON OR NONALLOY STEEL COILS 600MM OR MORE WIDE COLD-RLLD NOT CLAD, PNTD OR COATD, LESS THAN 0.5MM THICK NOT ANNEALED
    Steel with critical mineral commodity alloying agent7209182520FLAT-ROLLD IRON OR NONALLOY STEEL COILS 600MM OR MORE WIDE COLD-RLLD NOT CLAD, PLATED OR COATED, LESS THAN 0.361MM THICK(BLACKPLATE), ANNEALED
    Steel with critical mineral commodity alloying agent7209182585FLAT-ROLLD IRON OR NONALLOY STEEL COILS 600MM OR MORE WIDE COLD-RLLD NOT CLAD, PLATED OR COATED, LESS THAN 0.361MM THICK(BLACKPLATE), NESOI
    Steel with critical mineral commodity alloying agent7209186020FLAT-ROLLED IRON OR NONALLOY STEEL COILS, 600MM OR MORE WIDE, COLD-ROLLED, NOT CLAD, PLATED OR COATED,ANNEALED, NESOI
    Steel with critical mineral commodity alloying agent7209186090FLAT-ROLLED IRON OR NONALLOY STEEL COILS, 600MM OR MORE WIDE, COLD-ROLLED, NOT CLAD, PLATED OR COATED, NESOI
    Steel with critical mineral commodity alloying agent7209250000FLAT-ROLLED IRON OR NONALLOY STEEL, NOT COILS, 600 MM OR MORE WIDE, COLD-ROLLED (COLD-REDUCED), 3MM OR MORE THICK, NOT CLAD, PLATED OR COATED
    Steel with critical mineral commodity alloying agent7209260000FLAT-ROLLED IRON OR NONALLOY STEEL,NOT COILS,600MM OR MORE WIDE,COLD-ROLLED,OVER 1M BUT UNDER 3MM THICK,NOT CLAD PLATED OR COATED
    Steel with critical mineral commodity alloying agent7209270000FLAT-ROLLED IRON OR NONALLOY STEEL,NOT COILS,600 MM OR MORE WIDE,COLD-ROLLED (COLD-REDUCED),OVER 0.5MM BUT NOT OVER 1MM THICK,NOT CLAD PLATED OR COATD
    Steel with critical mineral commodity alloying agent7209280000FLAT-ROLLED IRON OR NONALLOY STEEL, NOT IN COILS, 600MM OR MORE WIDE, COLD-ROLLED (COLD-REDUCED), LESS THAN 0.5MM THICK, NOT CLAD, PLATED OR COATED
    Steel with critical mineral commodity alloying agent7209900000FLAT-ROLLED IRON OR NONALLOY STEEL, COILS OR NOT, 600MM OR MORE WIDE, COLD-ROLLED, NOT CLAD, PLATED OR COATED, NESOI
    Steel with critical mineral commodity alloying agent7211130000FLAT-ROLLED IRON OR NONALLOY STEEL, <600MM WIDE, HOT-ROLLED, NOT CLAD, PLATED OR COATED, UNIVERSAL MILL PLATE
    Steel with critical mineral commodity alloying agent7211140030FLAT-ROLLED HIGH-STRENGTH IRON OR NONALLOY STEEL, UNDER 600MM WIDE, HOT-ROLLED, NOT CLAD, PLATED OR COATED, 4.75MM THICK OR MORE
    Steel with critical mineral commodity alloying agent7211140045FLAT-ROLLED IRON OR NONALLOY STEEL UNDER 600MM WIDE HOT-ROLLED, NOT CLAD, PLATED OR COATED, 4.75MM OR MORE THICK, NOT COILED
    Steel with critical mineral commodity alloying agent7211140090FLAT-ROLLED IRON OR NONALLOY STEEL UNDER 600MM WIDE HOT-ROLLED, NOT CLAD, PLATED OR COATED, 4.75MM OR MORE THICK, COILS
    Steel with critical mineral commodity alloying agent7211191500FLAT-ROLLED HIGH-STRENGTH STEEL, UNDER 300MM WIDE, HOT-ROLLED, NOT CLAD, PLATED OR COATED
    Steel with critical mineral commodity alloying agent7211192000FLAT-ROLLED IRON OR NONALLOY STEEL, UNDER 300MM WIDE, HOT-ROLLED, NOT CLAD, PLATED OR COATED, OVER 1.25MM THICK
    Steel with critical mineral commodity alloying agent7211193000FLAT-ROLLED IRON OR NONALLOY STEEL UNDER 300MM WIDE HOT-ROLLED, NOT CLAD, PLATED OR COATED, 1.25MM OR LESS THICK
    Steel with critical mineral commodity alloying agent7211194500FLAT-ROLLED HIGH-STRENGTH IRON OR NONALLOY STEEL HOT-ROLLED, NOT CLAD, COATED OR PLATED, OVER 300MM BUT LESS THAN 600MM WIDE NESOI
    Steel with critical mineral commodity alloying agent7211196000FLAT-ROLLED IRON OR NONALLOY STEEL, 300 TO UNDER 600MM WIDE, HOT-ROLLED, NOT CLAD, PLATED OR COATED, PICKLED
    Steel with critical mineral commodity alloying agent7211197530FLAT-ROLLED IRON OR NONALLOY STEEL, 300 TO UNDER 600MM WIDE, HOT-ROLLED, NOT CLAD, PLATED OR COATED, IN COILS, WITH UNTRIMMED EDGES
    Steel with critical mineral commodity alloying agent7211197560FLAT-ROLLED IRON OR NONALLOY STEEL, 300 TO UNDER 600MM WIDE, HOT-ROLLED, NOT CLAD, PLATED OR COATED, NOT PICKLED, IN COILS, NESOI
    Steel with critical mineral commodity alloying agent7211197590FLAT-ROLLED IRON OR NONALLOY STEEL, 300 TO UNDER 600MM WIDE, HOT-ROLLED, NOT CLAD, PLATED OR COATED, NOT IN COILS
    Steel with critical mineral commodity alloying agent7211231500FLAT-ROLLED HIGH-STRENGTH STEEL,UNDER 300MM WIDE, NOT CLAD COATED OR PLATED, COLD-ROLLED, UNDER 25% CARBON,OVER 1.25 MM THICK
    Steel with critical mineral commodity alloying agent7211232000FLAT-ROLLED IRON OR NONALLOY STEEL UNDER 300MM WIDE, COLD-ROLLED, NOT CLAD, PLATED OR COATED, OVER 1.25MM THICK, UNDER 0.25 PERCENT CARBON
    Steel with critical mineral commodity alloying agent7211233000FLAT-ROLLED IRON OR NONALLOY STEEL, UNDER 300MM WIDE, COLD-ROLLED, NOT CLAD, PLATED OR COATED, OVER 0.25 BUT NOT OVER 1.25MM THICK, UNDER 0.25% CARBON
    Steel with critical mineral commodity alloying agent7211234500FLAT-ROLLED IRON OR NONALLOY STEEL UNDER 300MM WIDE, COLD-ROLLED, NOT CLAD, PLATED OR COATED, NOT OVER 0.25MM THICK, UNDER 0.25 PERCENT CARBON
    Steel with critical mineral commodity alloying agent7211236030FLAT-ROLLED IRON OR NONALLOY STEEL, 300 TO UNDER 600MM WIDE, COLD-ROLLED, NOT CLAD, PLATED OR COATED, OVER 1.25MM THICK, UNDER 0.25 PERCENT CARBON
    Steel with critical mineral commodity alloying agent7211236060FLAT-ROLLED IRON/NONALLOY STEEL, 300 TO UNDER 600MM WIDE, COLD-ROLLED, NOT CLAD, PLATED OR COATED, OVER 0.25 BUT NOT OVER 1.25MM THICK,LT 0.25% CARBON
    Steel with critical mineral commodity alloying agent7211236090FLAT-ROLLED IRON OR NONALLOY STEEL, 300 TO UNDER 600MM WIDE, COLD-ROLLED, NOT CLAD, PLATED OR COATED, NOT OVER 0.25MM THICK, UNDER 0.25% CARBON
    Steel with critical mineral commodity alloying agent7211292030FLAT-ROLLED IRON OR NONALLOY STEEL COILS, UNDER 51MM WIDE, COLD-ROLLED, NOT CLAD, PLATED OR COATED, OVER 0.25MM THICK, UNDER 0.25 PERCENT CARBON
    Steel with critical mineral commodity alloying agent7211292090FLAT-ROLLED IRON OR NONALLOY STEEL, UNDER 300MM WIDE, COLD-ROLLED, NOT CLAD, PLATED OR COATED, OVER 0.25MM THICK, 0.25 PERCENT OR MORE CARBON, NESOI
    Steel with critical mineral commodity alloying agent7211294500FLAT-ROLLED IRON OR NONALLOY STEEL, UNDER 300MM WIDE, COLD-ROLLED, NOT CLAD, PLATED OR COATED, 0.25MM OR LESS THICK, 0.25 PERCENT OR MORE CARBON
    Steel with critical mineral commodity alloying agent7211296030FLAT-ROLLED IRON OR NONALLOY STEEL, 300 TO UNDER 600MM WIDE, COLD-ROLLED, NOT CLAD, PLATED OR COATED, OVER 1.25MM THICK, 0.25 PERCENT OR MORE CARBON
    Steel with critical mineral commodity alloying agent7211296080FLAT-ROLLED IRON OR NONALLOY STEEL, 300 TO UNDER 600MM WIDE, COLD-ROLLED, NOT CLAD, PLATED OR COATED, 1.25MM OR LESS THICK, 0.25% OR MORE CARBON
    Steel with critical mineral commodity alloying agent7211900000FLAT-ROLLED IRON OR NONALLOY STEEL, LESS THAN 600MM WIDE, NOT CLAD, PLATED OR COATED, NESOI
    Steel with critical mineral commodity alloying agent7212600000FLAT-ROLLED IRON OR NONALLOY STEEL, LESS THAN 600MM WIDE, CLAD, NESOI
    Steel with critical mineral commodity alloying agent7213100000CONCRETE REINFORCING BARS AND RODS OF IRON OR NONALLOY STEEL, IN IRREGULARLY WOUND COILS, HOT-ROLLED
    Steel with critical mineral commodity alloying agent7213913011TIRE CORD-QLTY RODS, STAT NOTE 4, IRON/NONALLOY STEEL, IRREG COILS, CIRC SECTION <14MM DIAMETER; NT TEMPERED,TREATED/MFG,U.S. NOTE 9,SUBCHP3,CHP99
    Steel with critical mineral commodity alloying agent7213913015BARS AND RODS OF COLD HEADING QUALITY STEEL, HOT-ROLLED, IN IRREGULARLY WOUND COILS, CIRCULAR CROSS SECTION MEASURING LESS THAN 14 MM IN DIAMETER
    Steel with critical mineral commodity alloying agent7213913093BARS AND RODS OF IRON OR NONALLOY STEEL, NOT TEMPERED/TREATED/MANUFACTURED, HOT-ROLLED, IN IRREGULARLY WOUND COILS, CIRC X-SECTION DIAM LT 14MM NESOI
    Steel with critical mineral commodity alloying agent7213990030BARS AND RODS, IRON OR NONALLOY STEEL, HOT-ROLLED, IRREGULARLY WOUND COILS, CIRCULAR CROSS-SECTION, 14MM TO UNDER 19MM DIAMETER; NESOI
    Steel with critical mineral commodity alloying agent7213990060BARS AND RODS, IRON OR NONALLOY STEEL, HOT-ROLLED, IRREGULARLY WOUND COILS, CROSS-SECTION, 19MM AND OVER DIAMETER
    Steel with critical mineral commodity alloying agent7213990090BARS AND RODS, IRON OR NONALLOY STEEL, HOT-ROLLED, IRREGULARLY WOUND COILS, NESOI
    Steel with critical mineral commodity alloying agent7214100000BARS AND RODS OF IRON OR NONALLOY STEEL, NOT FURTHER WORKED THAN FORGED, INCLUDING THOSE TWISTED AFTER ROLLING
    Steel with critical mineral commodity alloying agent7214910016BARS AND RODS OF IRON/NONALLOY STEEL,HOT-ROLLED,HOT-DRAWN,OF RECTANGULAR (NOT SQUARE)CROSS-SEC,CONTG LT 0.25 PERCENT CARBON,MAX CROSS-SEC LT 152MM
    Steel with critical mineral commodity alloying agent7214910020BARS AND RODS OF IRON/NONALLOY STEEL,HOT-ROLLED,HOT-DRAWN,OF RECTANGULAR (NOT SQUARE)CROSS-SEC,CONTG LT 0.25 PERCENT CARBON,MAX CROSS-SEC 152MM/MORE
    Steel with critical mineral commodity alloying agent7214990016OTHER BARS AND RODS, IRON OR NONALLOY STEEL, HOT-WORKED, ROUNDS, LESS THAN 0.25 PERCENT CARBON, DIAMETER LESS THAN 76MM
    Steel with critical mineral commodity alloying agent7214990021OTHER BARS AND RODS, IRON OR NONALLOY STEEL, HOT-WORKED, ROUNDS, LESS THAN 0.25 PERCENT CARBON, DIAMETER OF 76MM OR MORE BUT NOT EXCEEDING 152MM
    Steel with critical mineral commodity alloying agent7214990026OTHER BARS AND RODS, IRON OR NONALLOY STEEL, HOT-WORKED, ROUNDS, LESS THAN 0.25 PERCENT CARBON, DIAMETER EXCEEDING 152MM
    Steel with critical mineral commodity alloying agent7214990060OTHER BARS AND RODS, IRON OR NONALLOY STEEL, HOT-WORKED, LESS THAN 0.25 PERCENT CARBON, NESOI
    Steel with critical mineral commodity alloying agent7215500016BARS AND RODS OF IRON OR NONALLOY STEEL, LT 0.25% OF CARBON BY WEIGHT, DIAM/CRS-SEC LT 76 MM, NT FURTHER WORKED THAN COLD-FORMED, COLD-FINISHED, NESOI
    Steel with critical mineral commodity alloying agent7215500018BARS AND RODS OF IRON OR NONALLOY STEEL, LT 0.25% CARBON BY WEIGHT, DIAM/CRS-SCT 76-228 MM, NOT FURTHER WORKED THAN COLD-FORMED, COLD-FINISHED, NESOI
    Steel with critical mineral commodity alloying agent7215500020BARS AND RODS OF IRON OR NONALLOY STEEL, LT 0.25% OF CARBON BY WEIGHT, DIAM/CRS-SEC GT 228 MM, NT FURTHER WORKED THAN COLD-FORMED,COLD-FINISHED, NESOI
    Steel with critical mineral commodity alloying agent7217101000FLAT WIRE, IRON OR NONALLOY STEEL, NOT PLATED OR COATED, UNDER 0.25 PERCENT CARBON, NOT OVER 0.25MM THICK
    Steel with critical mineral commodity alloying agent7217102000FLAT WIRE, IRON OR NONALLOY STEEL, NOT PLATED OR COATED, UNDER 0.25 PERCENT CARBON, OVER 0.25MM-1.25MM THICK
    Steel with critical mineral commodity alloying agent7217103000FLAT WIRE, IRON OR NONALLOY STEEL, NOT PLATED OR COATED, UNDER 0.25 PERCENT CARBON, OVER 1.25MM THICK
    Steel with critical mineral commodity alloying agent7217104040ROUND WIRE, IN COILS WEIGH NT MORE THAN 2 KG, IRON OR NONALLOY STEEL, NOT PLATED OR COATED, UNDER 0.25 PERCNT CARBON, UNDER 1.5MM DIAMETR, HEAT-TREATD
    Steel with critical mineral commodity alloying agent7217104045ROUND WIRE, IRON OR NONALLOY STEEL, NOT PLATED OR COATED, UNDER 0.25 PERCENT CARBON, UNDER 1.5MM DIAMETER, HEAT-TREATED
    Steel with critical mineral commodity alloying agent7217104090ROUND WIRE, IRON OR NONALLOY STEEL, NOT PLATED OR COATED, UNDER 0.25 PERCENT CARBON, UNDER 1.5MM DIAMETER,NOT HEAT-TREATED
    Steel with critical mineral commodity alloying agent7217105030ROUND WIRE, IRON OR NONALLOY STEEL, NOT PLATED OR COATED, UNDER 0.25 PERCENT CARBON, 1.5MM OR MORE DIAMETER, HEAT TREATED
    Steel with critical mineral commodity alloying agent7217105090ROUND WIRE, IRON OR NONALLOY STEEL, NOT PLATED OR COATED, UNDER 0.25 PERCENT CARBON, 1.5MM OR MORE DIAMETER, NO HEAT TREATED
    Steel with critical mineral commodity alloying agent7217106000OTHER WIRE, IRON OR NONALLOY STEEL, NOT PLATED OR COATED, UNDER 0.25 PERCENT CARBON
    Steel with critical mineral commodity alloying agent7217107000FLAT WIRE, IRON OR NONALLOY STEEL, NOT PLATED OR COATED, 0.25 PERCENT OR MORE CARBON
    Steel with critical mineral commodity alloying agent7218100000STAINLESS STEEL INGOTS AND OTHER PRIMARY FORMS
    Steel with critical mineral commodity alloying agent7218910015SEMIFINISHED STAINLESS STEEL, RECTANGULAR (NOT SQUARE) CROSS-SECTION, WIDTH LESS THAN 4 TIMES THICKNESS, CROSS-SECTIONAL AREA LESS THAN 232 CM SQUARED
    Steel with critical mineral commodity alloying agent7218910030SEMIFINISHED STAINLESS STEEL, RECTANGULAR (NOT SQUARE) CROSS-SECTION, WIDTH LESS THAN 4 TIMES THICKNESS, CROSS-SECTIONAL AREA OF 232 CM2 OR MORE
    Steel with critical mineral commodity alloying agent7218910060SEMIFINISHED STAINLESS STEEL, RECTANGULAR (NOT SQUARE) CROSS-SECTION, WIDTH AT LEAST 4 TIMES THE THICKNESS
    Steel with critical mineral commodity alloying agent7218990015SEMIFINISHED STAINLESS STEEL, SQUARE CROSS-SECTION, CROSS-SECTIONAL AREA LESS THAN 232 CM SQUARED
    Steel with critical mineral commodity alloying agent7218990030SEMIFINISHED STAINLESS STEEL, SQUARE CROSS-SECTION, CROSS-SECTIONAL AREA OF 232 CM SQUARED OR MORE
    Steel with critical mineral commodity alloying agent7218990045SEMIFINISHED STAINLESS STEEL, CIRCULAR CROSS-SECTION, CROSS-SECTIONAL AREA LESS THAN 232 CM SQUARED
    Steel with critical mineral commodity alloying agent7218990060SEMIFINISHED STAINLESS STEEL, CIRCULAR CROSS-SECTION,CROSS-SECTIONAL AREA OF 232 CM SQU ARED OR MORE
    Steel with critical mineral commodity alloying agent7218990090SEMIFINISHED PRODUCTS OF STAINLESS STEEL, NESOI
    Steel with critical mineral commodity alloying agent7219110030FLAT-ROLLED STAINLESS STEEL NOT FURTHER WORKED THAN HOT-ROLLED, IN COILS; OF A WIDTH NOT EXCEEDING 1575MM
    Steel with critical mineral commodity alloying agent7219110060FLAT-ROLLED STAINLESS STEEL NOT FURTHER WORKED THAN HOT-ROLLED, IN COILS; OF A WIDTH EXCEEDING 1575MM
    Steel with critical mineral commodity alloying agent7219120002FLAT-ROLLED STAINLESS STEEL COILS, OVER 600MM TO 1370MM WIDE, HOT-ROLLED, OVER 4.75MM TO 10MM THICK, NOT ANNEALED OR NOT PICKLED
    Steel with critical mineral commodity alloying agent7219120006FLAT-ROLLED HIGH-NICKEL STAINLESS STEEL 600 MM WIDE OR MORE HOT ROLLED COILED 4.75MM NOT OVER 10MM THICK, NESOI, OF HIGH-NICKEL ALLOY STEEL
    Steel with critical mineral commodity alloying agent7219120021FLAT-ROLLED STAINLESS STEEL, THICKNESS EXCEED 4.75MM BUT NOT 10MM, NESOI, NESOI,WIDTH OF 1370 OR MORE, THICKNESS EXCEED 6.8MM, WIDTH NOT EXCEED 1575MM
    Steel with critical mineral commodity alloying agent7219120026FLAT-ROLLED STAINLESS STEEL; OTHER; OTHER, OF A THICKNESS EXCEEDING 6.8MM; OF A WIDTH EXCEEDING 1575MM
    Steel with critical mineral commodity alloying agent7219120051FLAT-ROLLED STAINLESS STEEL HOT ROLLED, IN COILS, OF HIGH-NICKEL ALLOY STEEL; OTHER;OTHER, OF A WIDTH NOT EXCEEDING 1575MM
    Steel with critical mineral commodity alloying agent7219120056FLAT-ROLLED STAINLESS STEEL HOT ROLLED, IN COILS, OF HIGH-NICKEL ALLOY STEEL; OTHER; OTHER, OF A WIDTH EXCEEDING 1575MM
    Steel with critical mineral commodity alloying agent7219120066FLT-RLD STAINLESS STEEL COILS, OV 600 TO 1370MM WIDE, HOT-ROLLD, OV 4.75-UN 10MM THCK, OTHER, OTHER, OV 0.5-UN 24% NCKL, OV 1.5-UN 5% MOLYBDENUM
    Steel with critical mineral commodity alloying agent7219120071FLAT-ROLLED STAINLESS STEEL COILS, OVER 600 TO 1370MM WIDE, HOT-ROLLED, OVER 4.75-UNDER 10MM THICK, OTHER, OTHER, OTHER, OVER 0.5-UNDER 24% NICKEL, MO
    Steel with critical mineral commodity alloying agent7219120081FLAT-ROLLED STAINLESS STEEL COILS, OVER 600MM TO 1370MM WIDE, HOT-ROLLED, OVER 4.75MM TO 10MM THICK, OTHER
    Steel with critical mineral commodity alloying agent7219130002FLT-ROLLD STAINLESS STEEL COILS 600MM, HOT-ROLLED, 3-UN 4.75MM THCK, NOT ANNEALED OR PICKLED
    Steel with critical mineral commodity alloying agent7219130031FLAT-ROLLED STAINLESS STEEL 1370MM WDE OR MORE HOT-ROLLED COILED 3 TO UNDER 4.75MM THICK, NESOI
    Steel with critical mineral commodity alloying agent7219130051FLAT-ROLLED PRODUCTS OF STAINLESS STEEL, OF A WIDTH 600-1370MM, NOT FURTHER WORKED THAN HOT-ROLLED, IN COILS, THICKNESS 3-4.75MM, 0.5-24%NI, 1.5-5%MO
    Steel with critical mineral commodity alloying agent7219130071FLAT-ROLLED PRODUCTS OF STAINLESS STEEL, OF A WIDTH 600-1370 MM, NOT FURTHER WORKED THAN HOT-ROLLED, IN COILS, THICKNESS 3-4.75 MM, 0.5-24% NI, NESOI
    Steel with critical mineral commodity alloying agent7219130081FLAT-ROLLED STAINLESS STEEL COILS, OTHER, 600 BUT LESS THAN 1370MM WIDE, HOT-ROLLED, NICKEL CONTENT NESOI
    Steel with critical mineral commodity alloying agent7219140030FLAT-ROLLED STAINLESS STEEL 1370MM WDE OR MORE HOT-ROLLED COILED LESS THAN 3MM THICK
    Steel with critical mineral commodity alloying agent7219210005FLAT-ROLLED HIGH-NICKEL STAINLESS STEEL 600MM WIDE OR MORE HOT-ROLLED NOT COILED OVER 10MM THICK
    Steel with critical mineral commodity alloying agent7219210020FLAT-ROLLED STAINLESS STEEL; HOT ROLLED, NOT IN COILS; OF A THICKNESS EXCEEDING 10MM; OF A WIDTH NOT EXCEEDING 1575MM
    Steel with critical mineral commodity alloying agent7219210040FLAT-ROLLED STAINLESS STEEL; HOT ROLLED, NOT IN COILS; OF A THICKNESS EXCEEDING 10MM; OF A WIDTH EXCCEEDING 1575MM BUT NOT EXCEEDING 1880MM
    Steel with critical mineral commodity alloying agent7219210060FLAT-ROLLED STAINLESS STEEL; HOT ROLLED, NOT IN COILS; OF A THICKNESS EXCEEDING 10MM; OF A WIDTH EXCEEDING 1880MM
    Steel with critical mineral commodity alloying agent7219220005FLAT-ROLLED HIGH-NICKEL STAINLESS STEEL 600MM WIDE OR MORE HOT-ROLLED NOT COILED 4.75 OR MORE BUT NOT OVER 10MM THICK
    Steel with critical mineral commodity alloying agent7219220015FLAT-ROLLED STAINLESS STEEL; HOT-ROLLED; NOT COIL;OVER 1.5 PERCENT NICKEL, OVER 1.5 PERCENT BUT UNDER 5 PERCENT MOLYBDENUM; OF WIDTH NOT EXCEED 1575MM
    Steel with critical mineral commodity alloying agent7219220020FLAT-ROLLED STAINLESS STEEL; HOT-ROLLED; NOT COIL;OVER 1.5 PERCENT NICKEL, OVER 1.5 PERCENT BUT UNDER 5 PERCENT MOLYBDENUM; OF WIDTH 1575 LT 1880MM
    Steel with critical mineral commodity alloying agent7219220025FLAT-ROLLED STAINLESS STEEL; HOT-ROLLED; NOT COIL;OVER 1.5 PERCENT NICKEL, OVER 1.5 PERCENT BUT UNDER 5 PERCENT MOLYBDENUM; OF WIDTH EXCEEDING 1880MM
    Steel with critical mineral commodity alloying agent7219220035FLAT-ROLLED STAINLESS STEEL; HOT-ROLLED; NOT COILED; OVER 1.5 PERCENT NICKEL; OTHER; OF A WIDTH NOT EXCEEDING 1575 MM
    Steel with critical mineral commodity alloying agent7219220040FLAT-ROLLED STAINLESS STEEL; HOT-ROLLED; NOT COILED; OVER 1.5 PERCENT NICKEL; OTHER; OF A WIDTH EXCEEDING 1575 MM BUT NOT EXCEEDING 1880 MM
    Steel with critical mineral commodity alloying agent7219220045FLAT-ROLLED STAINLESS STEEL; HOT-ROLLED; NOT COILED; OVER 1.5 PERCENT NICKEL; OTHER; OF A WIDTH EXCEEDING 1880 MM
    Steel with critical mineral commodity alloying agent7219220070FLAT-ROLLED STAINLESS STEEL; HOT ROLLED; NOT IN COILS; OF A WIDTH NOT EXCEEDING 1575MM; OF A THICKNESS OF 4.75MM OR MORE BUT NOT EXCEEDING 10MM; NESOI
    Steel with critical mineral commodity alloying agent7219220075FLAT-ROLLED STAINLESS STEEL; HOT ROLLED; NOT IN COILS; OF A WIDTH EXCEEDING 1575 LT 1880 MM OF THICKNESS OF 4.75MM OR MORE BUT EXCEED 10MM; NESOI
    Steel with critical mineral commodity alloying agent7219220080FLAT-ROLLED STAINLESS STEEL; HOT ROLLED; NOT IN COILS; OF A WIDTH EXCEEDING 1880MM; OF A THICKNESS OF 4.75MM OR MORE BUT NOT EXCEEDING 10MM; NESOI
    Steel with critical mineral commodity alloying agent7219230030FLAT-ROLLED STAINLESS STEEL 1370MM OR MORE WIDE HOT-ROLLED NOT COILED 3 TO UNDER 4.75MM THICK
    Steel with critical mineral commodity alloying agent7219230060FLAT-ROLLED STAINLESS STEEL 600 BUT LESS THAN 1370MM WIDE HOT-ROLLED NOT COILED 3 TO UNDER 4.75MM THICK
    Steel with critical mineral commodity alloying agent7219240030FLAT-ROLLED STAINLESS STEEL 1370 MM OR MORE WIDE HOT-ROLLED NOT COILED LESS THAN 3MM THICK
    Steel with critical mineral commodity alloying agent7219240060FLAT-ROLLED STAINLESS STEEL 600MM BUT LESS THAN 1370 MM WIDE HOT-ROLLED NOT COILED LESS THAN 3MM THICK
    Steel with critical mineral commodity alloying agent7219310010FLAT-ROLLED STAINLESS STEEL 600MM WIDE OR MORE COLD-ROLLED, 4.75MM ORMORE THICK COILS
    Steel with critical mineral commodity alloying agent7219310050FLAT-ROLLED STAINLESS STEEL 600MM WIDE OR MORE COLD-ROLLED, 4.75MM ORMORE THICK NOT COILED
    Steel with critical mineral commodity alloying agent7219320020FLAT-ROLLED STAINLESS STEEL COILS, 1370MM OR MORE WIDE, COLD-ROLLED, 3 TO UNDER 4.75MM THK, OVER 0.5 PERCENT NICKEL
    Steel with critical mineral commodity alloying agent7219320025FLAT-ROLLED STAINLESS STEEL COILS, 1370MM OR MORE WIDE, COLD-ROLLED, 3MM BUT LESS THAN 4.75MM THICK, NICKEL CONTENT NESOI
    Steel with critical mineral commodity alloying agent7219320036FLAT-ROLLED STAINLESS STEEL COILS,600-UNDER 1370MM WIDE,COLD-ROLLED,3-UNDER 4.75MM THICK,OVER 0.5 PERCENT NICKEL,OVER 1.5 BUT UNDER 5 PERCENT MOLYBDEN
    Steel with critical mineral commodity alloying agent7219320038FLAT-ROLLED STAINLESS STEEL COILS, 600-UNDER 1370MM WIDE, COLD-ROLLED,3-UNDER 4.75MM THICK, OVER 0.5 PERCENT NICKEL, MOLYBDENUM CONTENT NESOI
    Steel with critical mineral commodity alloying agent7219320042FLAT-ROLLED STAINLESS STEEL COILS, 600-UNDER 1370MM WIDE, COLD-ROLLED, 3-UNDER 4.75MM THICK, NICKEL CONTENT NESOI, LESS THAN 15 PERCENT CHROMIUM
    Steel with critical mineral commodity alloying agent7219320044FLAT-ROLLED STAINLESS STEEL COILS, 600MM TO UNDER 1370MM WIDE, COLD-ROLLED, 3MM BUT LESS THAN 4.75MM THICK, NICKEL CONTENT NESOI
    Steel with critical mineral commodity alloying agent7219320045FLAT-ROLLED STAINLESS STEEL 1370MM OR MORE WIDE COLD-ROLLED 3 TO UNDER 4.75MM THCK NOT COILED
    Steel with critical mineral commodity alloying agent7219320060FLAT-ROLLED STAINLESS STEEL 600MM BUT LESS THAN 1370MM WIDE COLD-ROLLED 3 TO UNDER 4.75MM THCK NOT COILED
    Steel with critical mineral commodity alloying agent7219330005HIGH-NICKEL STAINLESS STEEL FR 1370MM OR MORE W CR 1-UN 3MM THK COILS
    Steel with critical mineral commodity alloying agent7219330020FLAT-ROLLED STAINLESS STEEL COILS, 1370 MM OR MORE WIDE, COLD-ROLLED, OVER 1MM BUT LESS THAN 3MM THICK, MORE THAN 0.5 PERCENT NICKEL
    Steel with critical mineral commodity alloying agent7219330025FLAT-ROLLED STAINLESS STEEL COILS, 1370MM OR MORE WIDE, COLD-ROLLED, OVER 1 MM BUT LESS THAN 3 MM THICK, NICKEL CONTENT NESOI
    Steel with critical mineral commodity alloying agent7219330035HIGH-NICKEL STAINLESS STEEL FR 600-UN 1370MM W CR 1-UN 3MM THK COILS
    Steel with critical mineral commodity alloying agent7219330036FLAT-ROLLED STAINLESS STEEL COILS, 600-UNDER 1370MM WIDE, COLD-ROLLED, OVER 1MM-UNDER 3MM THICK, OVER 0.5% NICKEL, OVER 1.5-UNDER 5 PERCENT MOLYBDENUM
    Steel with critical mineral commodity alloying agent7219330042FLAT-ROLLED STAINLESS STEEL COILS, 600-UNDER 1370 MM WIDE, COLD-ROLLED, OVER 1MM-UNDER 3MM THICK, LESS THAN 15 PERCENT CHROMIUM
    Steel with critical mineral commodity alloying agent7219330045FLAT-ROLLED STAINLESS STEEL 1370MM OR MORE WIDE COLD-ROLLED 1 TO UNDER 3MM THICK NOT COILED
    Steel with critical mineral commodity alloying agent7219330070FLAT-ROLLED STAINLESS STEEL,600MM BUT LESS THAN 1370MM WIDE,COLD-ROLLED,OVER 1MM BUT UNDER 3 MM THICK, NOT COILS, OVER 0.5 BUT UNDER 24 PERCENT NICKEL
    Steel with critical mineral commodity alloying agent7219330080FLAT-ROLLED STAINLESS STEEL, 600MM BUT LESS THAN 1370MM WIDE, COLD-ROLLED, OVER 1MM BUT UNDER 3MM THICK, NOT COILS, NESOI
    Steel with critical mineral commodity alloying agent7219340005HIGH-NICKEL FR STAINLESS STEEL 600MM OR MORE WIDE CR 0.5-1MM THK COILS
    Steel with critical mineral commodity alloying agent7219340020FLAT-ROLLED STAINLESS STEEL COILS, 600MM OR MORE WIDE, COLD-ROLLED, 0.5-1MM THICK, OVER 5 PERCENT NICKEL, OVER 1.5-UNDER 5 PERCENT MOLYBDENUM
    Steel with critical mineral commodity alloying agent7219340025FLAT-ROLLED STAINLESS STEEL COILS, 600MM OR MORE WIDE, COLD-ROLLED, 0.5MM TO 1MM THICK, MORE THAN 5 PERCENT NICKEL, MOLYBDENUM CONTENT NESOI
    Steel with critical mineral commodity alloying agent7219340030FLAT-ROLLED STAINLESS STEEL COILS, 600MM OR MORE WIDE, COLD-ROLLED, 0.5MM TO 1MM THICK, UNDER 15 PERCENT CHROMIUM
    Steel with critical mineral commodity alloying agent7219340035FLAT-ROLLED STAINLESS STEEL COILS, 600MM OR MORE WIDE, COLD-ROLLED, 0.5MM TO 1MM THICK, NESOI
    Steel with critical mineral commodity alloying agent7219340050FLAT-ROLLED STAINLESS STEEL 600MM OR MORE WIDE COLD-ROLLED 0.5 BUT NOT OVER 1MM THICK NOT COILED
    Steel with critical mineral commodity alloying agent7219350005FLAT-ROLLED STAINLESS STEEL COILS,600MM OR MORE WIDE,COLD-ROLLED,UNDER 0.5MM THICK,OVER 0.5-UNDER 24% NICKEL, OVER 1.5-UNDER 5% MOLYBDENUM
    Steel with critical mineral commodity alloying agent7219350015FLAT-ROLLED STAINLESS STEEL COILS,600MM OR MORE WIDE,COLD-ROLLED,LESS THAN 0.5MM THICK,OVER 0.5 PERCENT TO UN 24% NICKEL, MOLYBDENUM CONTNT NESOI
    Steel with critical mineral commodity alloying agent7219350030FLAT-ROLLED STAINLESS STEEL COILS, 600MM OR MORE WIDE, COLD-ROLLED, LESS THAN 0.5MM THICK, NICKEL CONTENT NESOI, LESS THAN 15 PERCENT CHROMIUM
    Steel with critical mineral commodity alloying agent7219350035FLAT-ROLLED STAINLESS STEEL COILS, 600MM OR MORE WIDE, COLD-ROLLED, LESS THAN 0.5MM THICK, NICKEL CONTENT NESOI, NESOI
    Steel with critical mineral commodity alloying agent7219350050FLAT-ROLLED STAINLESS STEEL 600MM OR MORE WIDE COLD-ROLLED LESS THAN 0.5MM THICK NT COILED
    Steel with critical mineral commodity alloying agent7219900010HIGH-NICKEL STAINLESS STEEL FLAT-ROLLED 600MM OR MORE WIDE, NESOI
    Steel with critical mineral commodity alloying agent7219900020OTHER FLAT-ROLLED STAINLESS STEEL, 600MM OR MORE WIDE, OVER 0.5 PERCENT NICKEL, OVER 1.5 BUT UNDER 5 PERCENT MOLYBDENUM
    Steel with critical mineral commodity alloying agent7219900025OTHER FLAT-ROLLED STAINLESS STEEL, 600MM OR MORE WIDE, OVER 0.5 PERCENT NICKEL, NESOI
    Steel with critical mineral commodity alloying agent7219900080OTHER FLAT-ROLLED STAINLESS STEEL, 600MM OR MORE WIDE, NESOI
    Steel with critical mineral commodity alloying agent7220110000FLAT-ROLLED, STAINLESS STEEL, LESS THAN 600MM WIDE, HOT ROLLED, 4.75MM OR MORE THICK
    Steel with critical mineral commodity alloying agent7220121000FLAT-ROLLED STAINLESS STEEL 300 TO UNDER 600MM WIDE HOT-ROLLED UNDER 4.75MM THICK
    Steel with critical mineral commodity alloying agent7220125000FLAT-ROLLED STAINLESS STEEL LESS THAN 300MM WIDE HOT-ROLLED UNDER 4.75MM THICK
    Steel with critical mineral commodity alloying agent7220201010FLAT-ROLLED STAINLESS STEEL, 300MM TO UNDER 600MM WIDE, COLD-ROLLED, OVER 0.5 TO UNDER 24 PERCENT NICKEL, OVER 1.5 BUT UNDER 5 PERCENT MOLYBDENUM
    Steel with critical mineral commodity alloying agent7220201015FLAT-ROLLED STAINLESS STEEL, 300 TO UNDER 600MM WIDE, COLD-ROLLED, OVER 0.5 PERCENT BUT UNDER 24 PERCENT NICKEL, NESOI
    Steel with critical mineral commodity alloying agent7220201060FLAT-ROLLED STAINLESS STEEL, 300 TO UNDER 600MM WIDE, COLD-ROLLED, NICKEL CONTENT NESOI, UNDER 15 PERCENT CHROMIUM
    Steel with critical mineral commodity alloying agent7220201080FLAT-ROLLED STAINLESS STEEL, 300 TO UNDER 600MM WIDE, COLD-ROLLED, NESOI
    Steel with critical mineral commodity alloying agent7220206005FLAT-ROLLED PRODUCTS OF STAINLESS STEEL OF A WIDTH LESS THAN 300MM NOT FURTHER WORKED THAN COLD-ROLLED, THICKNESS EXCEEDING 1.25MM, HIGH NICKEL ALLOY
    Steel with critical mineral commodity alloying agent7220206010FLAT-ROLLED STAINLESS STEEL, UNDER 300MM WIDE, COLD-ROLLED, OVER 1.25MM THICK, OVER 0.5 PERCENT NICKEL, OVER 1.5 BUT UNDER 5 PERCENT MOLYBDENUM
    Steel with critical mineral commodity alloying agent7220206015FLAT-ROLLED STAINLESS STEEL, UNDER 300MM WIDE, COLD-ROLLED, OVER 1.25MM THICK, OVER 0.5 PERCENT NICKEL, NESOI
    Steel with critical mineral commodity alloying agent7220206060FLAT-ROLLED STAINLESS STEEL, UNDER 300MM WIDE, COLD-ROLLED, OVER 1.25MM THICK, 0.5 PERCENT OR LESS NICKEL, UNDER 15 PERCENT CHROMIUM
    Steel with critical mineral commodity alloying agent7220206080FLAT-ROLLED STAINLESS STEEL, UNDER 300MM WIDE, COLD-ROLLED, OVER 1.25MM THICK, NESOI
    Steel with critical mineral commodity alloying agent7220207005FLAT-ROLLED PRODUCTS OF STAINLESS STEEL, WIDTH LS THN 300MM NOT FURTHER WORKED THN COLD-ROLLED, THICKNESS OV .25MM BUT NT OV 1.25MM, HIGH NICKEL ALLOY
    Steel with critical mineral commodity alloying agent7220207010FLAT-ROLLED STAINLESS STEEL, UNDER 300MM WIDE, COLD-ROLLED, OVER 0.25-1.25MM THICK, OVER 0.5 PERCENT NICKEL, OV 1.5-UNDER 5 PERCENT MOLYBDENUM
    Steel with critical mineral commodity alloying agent7220207015FLAT-ROLLED STAINLESS STEEL, UNDER 300M,M WIDE, COLD-ROLLED, OVER 0.25MM TO 1.25MM THICK, OVER 0.5 PERCENT NICKEL, NESOI
    Steel with critical mineral commodity alloying agent7220207060FLAT-ROLLED STAINLESS STEEL, UNDER 300MM WIDE, COLD-ROLLED, OVER 0.25-1.25MM THICK, 0.5 PERCENT OR LESS NICKEL, UNDER 15 PERCENT CHROMIUM
    Steel with critical mineral commodity alloying agent7220207080FLAT-ROLLED STAINLESS STEEL UNDER 300MM WIDE, COLD-ROLLED, OVER 0.25MM BUT NOT OVER 1.25MM THICK, NESOI
    Steel with critical mineral commodity alloying agent7220208000FLAT-ROLLED STAINLESS STEEL LESS THAN 300MM WIDE COLD-ROLLED RAZOR BLADE STEEL NOT OVER 0.25MM THICK
    Steel with critical mineral commodity alloying agent7220209030FLAT-ROLLED STAINLESS STEEL, UNDER 300MM WIDE, COLD-ROLLED, NOT OVER 0.25MM THICK, OVER 0.5 BUT UNDER 24 PERCENT NICKEL, NESOI
    Steel with critical mineral commodity alloying agent7220209060FLAT-ROLLED STAINLESS STEEL UNDER 300MM WIDE, COLD-ROLLED, NOT OVER 0.25MM THICK, NESOI
    Steel with critical mineral commodity alloying agent7220900010OTHER FLAT-ROLLED STAINLESS STEEL, UNDER 600MM WIDE, OVER 0.5 PERCENT BUT UNDER 24 PERCENT NICKEL, OVER 1.5 BUT UNDER 5 PERCENT MOLYBDENUM
    Steel with critical mineral commodity alloying agent7220900015OTHER FLAT-ROLLED STAINLESS STEEL, UNDER 600MM WIDE, OVER 0.5 PERCENT BUT UNDER 24 PERCENT NICKEL, NESOI
    Steel with critical mineral commodity alloying agent7220900060OTHER FLAT-ROLLED STAINLESS STEEL, UNDER 600MM WIDE, NICKEL CONTENT NESOI, LESS THAN 15 PERCENT CHROMIUM
    Steel with critical mineral commodity alloying agent7220900080OTHER FLAT-ROLLED STAINLESS STEEL, UNDER 600MM WIDE, NESOI
    Steel with critical mineral commodity alloying agent7221000005STAINLESS STEEL BARS AND RODS, HOT-ROLLED, IN IRREGULAR WOUND COILS, OF HIGH NICKEL ALLOY STEEL
    Steel with critical mineral commodity alloying agent7221000030STAINLESS STEEL BARS/RODS, HOT-ROLLED, IN IRREG WOUND COILS, OTHER THAN HIGH NICKEL, CIRCULAR CROSS SECTION WITH DIAM 14MM OR MORE BUT LESS THAN 19MM
    Steel with critical mineral commodity alloying agent7221000045STAINLESS STEEL BARS AND RODS, HOT-ROLLED, IN IRREGULAR WOUND COILS, OTHER THAN HIGH NICKEL ALLOY, CIRCULAR CROSS SECTION WITH DIAMETER 19MM OR MORE
    Steel with critical mineral commodity alloying agent7221000075STAINLESS STEEL BARS AND RODS, HOT-ROLLED, IN IRREGULAR WOUND COILS, OTHER THAN HIGH NICKEL ALLOY, OTHER THAN CIRCULAR CROSS SECTION
    Steel with critical mineral commodity alloying agent7222110001BARS AND RODS OF STAINLESS STEEL, ELECTROSLAG OR VACUUM ARC REMELTED, OF CIRCULAR CROSS-SECTION NOT FURTHER WORKED THAN HOT-ROLLED HOT-DRAWN ETC NESOI
    Steel with critical mineral commodity alloying agent7222110006BARS AND RODS OF HIGH-NICKEL ALLOY STEEL, OF CIRCULAR CROSS-SECTION, NOT FURTHER WORKED THAN HOT-ROLLED, HOT-DRAWN OR EXTRUDED, NESOI
    Steel with critical mineral commodity alloying agent7222110057BARS AND RODS OF STAINLESS STEEL, LT 8% BY WEIGHT OF NICKEL, WTH A MAX CROSS-SECTION DIMENSN OF LT 152.4 MM, OF CIRCULAR CROSS SECTION, HOT-WORKED
    Steel with critical mineral commodity alloying agent7222110059BARS AND RODS OF STAINLESS STEEL, WITH A MAXIMUM CROSS-SECTIONAL DIMENSION OF LESS THAN 152.4 MM, OF CIRCULAR CROSS SECTION, HOT-WORKED, CONTAINING 8%
    Steel with critical mineral commodity alloying agent7222110082BARS AND RODS OF STAINLESS STEEL, LT 8% BY WEIGHT OF NICKEL, WITH A MAX CROSS-SECTION DIMENSN OF 152.4 MM OR MORE, OF CIR CROSS-SECTION, HOT-WORK
    Steel with critical mineral commodity alloying agent7222110084BARS AND RODS OF STAINLESS STEEL, WITH A MAXIMUM CROSS-SECTIONAL DIMENSION OF 152.4 MM OR MORE, OF CIRCULAR CROSS-SECTION, HOT-WORKED, CONTAINING 8% O
    Steel with critical mineral commodity alloying agent7222190001BARS AND RODS OF STAINLESS STEEL, ELECTROSLAG OR VACUUM ARC REMELTED, NOT FURTHER WORKED THAN HOT-ROLLED, HOT-DRAWN OR EXTRUDED, NESOI
    Steel with critical mineral commodity alloying agent7222190006BARS AND RODS OF HIGH-NICKEL ALLOY STEEL, NOT FURTHER WORKED THAN HOT-ROLLED, HOT-DRAWN OR EXTRUDED, NESOI
    Steel with critical mineral commodity alloying agent7222190052BARS AND RODS OF STAINLESS STEEL, LT 8% BY WEIGHT OF NICKEL, NOT FURTHER WORKED THAN HOT-ROLLED, HOT-DRAWN OR EXTRUDED
    Steel with critical mineral commodity alloying agent7222190054BARS AND RODS OF STAINLESS STEEL, NOT FURTHER WORKED THAN HOT-ROLLED, HOT-DRAWN OR EXTRUDED, CONTAINING 8% OR MORE BUT LESS THAN 24% BY WEIGHT OF NICK
    Steel with critical mineral commodity alloying agent7222200001BARS AND RODS OF STAINLESS STEEL, ELECTROSLAG OR VACUUM ARC REMELTED, NOT FURTHER WORKED THAN COLD-FORMED OR COLD-FINISHED
    Steel with critical mineral commodity alloying agent7222200006BARS AND RODS OF HIGH-NICKEL ALLOY STEEL, NOT FURTHER WORKED THAN COLD-FORMED OR COLD-FINISHED, NESOI
    Steel with critical mineral commodity alloying agent7222200041BARS AND RODS OF STAINLS STEEL, LT 8% BY WEIGHT OF NICKEL, WITH A MAX CIRCULAR CROSS-SEC DIMENSN OF LT 18 MM, NOT FURTHR WORKD THAN COLD-FORMD OR COLD
    Steel with critical mineral commodity alloying agent7222200043BARS AND RODS OF STAINLESS STEEL, MORE THAN 8% BUT LESS THAN 24% BY WEIGHT OF NICKEL, WITH A MAX CIRCULAR CROSS-SECTIONAL DIMENSION OF LESS THAN 18 MM
    Steel with critical mineral commodity alloying agent7222200062BARS AND RODS OF STAINLS STEEL, LT 8% WEIGHT OF NICKL W/ MAX CIRCULAR CROSS-SEC DIM OF 18MM OR MORE BUT LT 152.4MM, NT FURTHR WORKD THAN COLD-FORMD OR
    Steel with critical mineral commodity alloying agent7222200064BARS AND RODS OF STAINLS STEEL, MORE THAN 8% BUT LESS THAN 24% BY WEIGHT OF NICKEL,W/ A MAX CIRCULAR CROSS-SECT DIM OF 18MM OR MORE BUT LESS THAN 152.
    Steel with critical mineral commodity alloying agent7222200067BARS AND RODS OF STAINLS STEEL, LT 8% BY WEIGHT NICKL, W/ A MAX CIRCULAR CROSS-SECTIN DIMEN OF 152.4 MM OR MORE NT FURTHR WORKD THAN COLD-FORMD OR COL
    Steel with critical mineral commodity alloying agent7222200069BARS AND RODS OF STAINLESS STEEL, MT 8% BUT LESS THAN 24% BY WEIGHT OF NICKEL, W/ A MAXIMUM CIRCULAR CROSS-SECTIONAL DIMENSION OF 152.4 MM OR MORE NOT
    Steel with critical mineral commodity alloying agent7222200071BARS AND RODS OF STAINLS STEEL, LT 8% BY WEIGHT NICKL, NOT FURTHR WORKD THAN COLD-FORMD OR COLD FINISHED
    Steel with critical mineral commodity alloying agent7222200073BARS AND RODS OF STAINLESS STEEL MT 8% BUT LT 24% BY WEIGHT OF NI W/ A MAXIMUM CIRCULAR CROSS-SECTIONAL DIMENSION OF 152.4 MM OR MORE NOT FURTHER WORK
    Steel with critical mineral commodity alloying agent7222300001BARS AND RODS OF STAINLESS STEEL, ELECTROSLAG OR VACUUM ARC REMELTED, NESOI
    Steel with critical mineral commodity alloying agent7222300012BARS AND RODS OF HIGH-NICKEL ALLOY STEEL, WITH A MAXIMUM CROSS-SECTIONAL DIMENSION OF 152.4 MM OR MORE
    Steel with critical mineral commodity alloying agent7222300022BARS AND RODS OF STAINLESS STEEL, LT 8% BY WEIGHT OF NICKEL, WITH A MAX CROSS-SECTION DIMENSION OF LESS THAN 152.4 MM
    Steel with critical mineral commodity alloying agent7222300024BARS AND RODS OF STAINLESS STEEL, WITH A MAXIMUM CROSS-SECTIONAL DIMENSION OF LESS THAN 152.4 MM, CONTAINING 8% OR MORE BUT LESS THAN 24% BY WEIGHT OF
    Steel with critical mineral commodity alloying agent7222300082BARS AND RODS OF STAINLESS STEEL, LT 8% BY WEIGHT OF NICKEL, WITH A MAXIMUM CROSS-SECTIONAL DIMENSION OF 152.4 MM OR MORE, NESOI
    Steel with critical mineral commodity alloying agent7222300084BARS AND RODS OF STAINLESS STEEL, WITH A MAXIMUM CROSS-SECTIONAL DIMENSION OF 152.4 MM OR MORE, CONTAINING 8% OR MORE BUT LESS THAN 24% BY WEIGHT OF N
    Steel with critical mineral commodity alloying agent7222403025ANGLES STAINLESS STEEL HOT-ROLLED NOT DRILLED, PUNCHED OR OTHERWISE ADVANCED MAXIMUM CROSS-SECTION 80MM OR MORE
    Steel with critical mineral commodity alloying agent7222403045SHAPES AND SECTIONS OF STAINLESS STEEL, HOT-ROLLED, NOT DRILLED, PUNCHED OR OTHERWISE ADVANCED, WITH A MAXIMUM CROSS-SECTIONAL DIMENSION GT=80MM
    Steel with critical mineral commodity alloying agent7222403065ANGLES STAINLESS STEEL HOT-ROLLED NOT DRILLED, PUNCHED OR OTHERWISE ADVANCED MAXIMUM CROSS-SECTION UNDER 80MM
    Steel with critical mineral commodity alloying agent7222403085SHAPES AND SECTIONS STAINLESS STEEL HOT-ROLLED NOT DRILLED, PUNCHED OR OTHERWISE ADVANCED MAXIMUM CROSS-SECTION UNDER 80MM
    Steel with critical mineral commodity alloying agent7222406000ANGLES SHAPES AND SECTIONS STAINLESS STEEL NESOI
    Steel with critical mineral commodity alloying agent7223001005SPRING ROUND WIRE OF STAINLESS STEEL
    Steel with critical mineral commodity alloying agent7223001016WIRE, STAINLESS STEEL, ROUND, UNDER 0.25MM IN DIAMETER, NESOI
    Steel with critical mineral commodity alloying agent7223001031WIRE, STAINLESS STEEL, ROUND, 0.25 TO UNDER 0.76MM IN DIAMETER, NESOI
    Steel with critical mineral commodity alloying agent7223001046WIRE, STAINLESS STEEL, ROUND, 0.76 TO UNDER 1.52MM IN DIAMETER, NESOI
    Steel with critical mineral commodity alloying agent7223001061WIRE, STAINLESS STEEL, ROUND, 1.52 TO UNDER 5.1MM IN DIAMETER, NESOI
    Steel with critical mineral commodity alloying agent7223001076WIRE, STAINLESS STEEL, ROUND, 5.1MM OR MORE IN DIAMETER, NESOI
    Steel with critical mineral commodity alloying agent7223005000WIRE STAINLESS STEEL FLAT
    Steel with critical mineral commodity alloying agent7223009000WIRE STAINLESS STEEL OTHER THAN ROUND OR FLAT
    Steel with critical mineral commodity alloying agent7301100000SHEET PILING OF IRON OR STEEL, WHETHER OR NOT DRILLED, PUNCHED OR MADE FROM ASSEMBLED ELEMENTS
    Steel with critical mineral commodity alloying agent7301201000ANGLES, SHAPES AND SECTIONS, WELDED, OF IRON OR NONALLOY STEEL
    Steel with critical mineral commodity alloying agent7301205000ANGLES, SHAPES AND SECTIONS, WELDED, OF ALLOY STEEL
    Steel with critical mineral commodity alloying agent7302101010RAILS, NEW STANDARD TEE, OF IRON OR NONALLOY STEEL, NOT HEAT TREATED, OVER 30 KG PER METER
    Steel with critical mineral commodity alloying agent7302101015OTHER RAILS, NEW, OF IRON OR NONALLOY STEEL,NOT HEAT TREATED OVER 30 KG PER METER
    Steel with critical mineral commodity alloying agent7302101025RAILS, NEW, OF IRON OR NONALLOY STEEL, NOT HEAT TREATED, NOT OVER 30 KG PER METER
    Steel with critical mineral commodity alloying agent7302101075RAILS, USED, OF IRON OR NONALLOY STEEL, NOT RAILWAY RAILS FOR REROLLING, NOT SCRAP
    Steel with critical mineral commodity alloying agent7302105020RAILS OF ALLOY STEEL, NEW
    Steel with critical mineral commodity alloying agent7302105060RAILS OF ALLOY STEEL, USED, OTHER THAN RAILWAY RAILS FOR REROLLING,
    Steel with critical mineral commodity alloying agent7302300000SWITCH BLADES, CROSSING FROGS, POINT RODS AND OTHER CROSSING PIECES OF IRON OR STEEL
    Steel with critical mineral commodity alloying agent7302400000FISH PLATES AND SOLE PLATES OF IRON OR STEEL
    Steel with critical mineral commodity alloying agent7302909000OTHER RAILWAY OR TRAMWAY TRACK CONSTRUCTION MATERIAL OF IRON OR STEEL NESOI
    Steel with critical mineral commodity alloying agent7304110020LINE PIPE OF A KIND USED FOR OIL OR GAS PIPELINES, SEAMLESS, OF STAINLESS STEEL, WITH AN OUTSIDE DIAMETER NOT EXCEEDING 114.3 MM
    Steel with critical mineral commodity alloying agent7304110050LINE PIPE OF A KIND USED FOR OIL OR GAS PIPELINES, SEAMLESS, OF STAINLESS STEEL, WITH AN OUTSIDE DIAM EXCEEDING 114.3 MM, BUT NOT EXCEEDING 406.4 MM
    Steel with critical mineral commodity alloying agent7304110080LINE PIPE OF A KIND USED FOR OIL OR GAS PIPELINES, SEAMLESS, OF STAINLESS STEEL, WITH AN OUTSIDE DIAMETER EXCEEDING 406.4 MM
    Steel with critical mineral commodity alloying agent7304191020LINE PIPE OF A KIND USED FOR OIL OR GAS PIPELINES, SEAMLESS, OF IRON (NONCAST) OR NONALLOY STEEL, WITH AN OUTSIDE DIAMETER NOT EXCEEDING 114.3 MM
    Steel with critical mineral commodity alloying agent7304191030SEAMLESS LINE PIPE FOR OIL OR GAS PIPELINES, IRON OR NONALLOY STEEL, OUTSIDE DIAMETER OVER 114.3 MM BUT LESS THAN 215.9 MM
    Steel with critical mineral commodity alloying agent7304191045SEAMLESS LINE PIPE FOR OIL OR GAS PIPELINES, IRON OR NONALLOY STEEL, OUTSIDE DIAMETER OF 215.9-406.4 MM, WALL THICKNESS UNDER 12.7 MM
    Steel with critical mineral commodity alloying agent7304191060SEAMLESS OIL OR GAS LINE PIPE, IRON OR NONALLOY STEEL, OUTSIDE DIAMETER OF 215.9-406.4 MM, WALL THICKNESS 12.7 MM OR MORE
    Steel with critical mineral commodity alloying agent7304191080LINE PIPE OF A KIND USED FOR OIL OR GAS PIPELINES, SEAMLESS, OF IRON (NONCAST) OR NONALLOY STEEL, WITH AN OUTSIDE DIAMETER EXCEEDING 406.4 MM
    Steel with critical mineral commodity alloying agent7304195020LINE PIPE OF A KIND USED FOR OIL OR GAS PIPELINES, SEAMLESS, OF OTHER ALLOY STEEL, NOT STAINLESS, WITH AN OUTSIDE DIAMETER NOT EXCEEDING 114.3 MM
    Steel with critical mineral commodity alloying agent7304195050LINE PIPE, USED FOR OIL OR GAS PIPELINES, SEAMLESS, OF OTHER ALLOY STEEL, NOT STAINLESS, WITH AN OUTSIDE DIAMETER >114.3 MM, BUT <406.4 MM
    Steel with critical mineral commodity alloying agent7304195080LINE PIPE OF A KIND USED FOR OIL OR GAS PIPELINES, SEAMLESS, OF ALLOY STEEL, NOT STAINLESS, WITH AN OUTSIDE DIAMETER EXCEEDING 406.4 MM
    Steel with critical mineral commodity alloying agent7304220030DRILL PIPE FOR OIL OR GAS, SEAMLESS, STAINLESS STEEL, OUTSIDE DIAMETER NOT OVER 168.3MM, WALL THICKNESS NOT OVER 9.5MM
    Steel with critical mineral commodity alloying agent7304220045DRILL PIPE FOR OIL OR GAS, SEAMLESS, STAINLESS STEEL, OUTSIDE DIAMETER NOT OVER 168.3MM, WALL THICKNESS OVER 9.5MM
    Steel with critical mineral commodity alloying agent7304220060DRILL PIPE FOR OIL OR GAS, SEAMLESS, STAINLESS STEEL, OUTSIDE DIAMETER OVER 168.3MM
    Steel with critical mineral commodity alloying agent7304233000OIL WELL DRILL PIPE, OF IRON OR NONALLOY STEEL
    Steel with critical mineral commodity alloying agent7304236030DRILL PIPE FOR OIL OR GAS, SEAMLESS, OF OTH ALLOY STEEL NOT STAINLESS, OUTSIDE DIAMETER NOT OVER 168.3MM, WALL THICKNESS NOT OVER 9.5MM
    Steel with critical mineral commodity alloying agent7304236045DRILL PIPE FOR OIL OR GAS, SEAMLESS, OF OTH ALLOY STEEL NOT STAINLESS, OUTSIDE DIAMETER NOT OVER 168.3MM, WALL THICKNESS OVER 9.5MM
    Steel with critical mineral commodity alloying agent7304243080CASING, SEAMLESS, OIL OR GAS DRILLING, STAINLESS STEEL, THREADED OR COULPED, OUTSIDE DIAMETER OVER 406.4 MM
    Steel with critical mineral commodity alloying agent7304244010CASING, SEAMLESS, OIL OR GAS DRILLING, STAINLESS STEEL, NOT THREADED OR COUPLED, OUTSIDE DIAMETER LESS THAN 215.9MM, WALL THICKNESS LESS THAN 12.7MM
    Steel with critical mineral commodity alloying agent7304244020CASING, SEAMLESS, OIL AND GAS DRILLING, STAINLESS STEEL, NOT THREADED OR COUPLED, OUTSIDE DIAMETER UNDER 215.9MM, WALL THICKNESS 12.7MM OR MORE
    Steel with critical mineral commodity alloying agent7304246015TUBING, SEAMLESS, OIL OR GAS DRILLING, STAINLESS STEEL, OUTSIDE DIAMETER NOT OVER 114.3MM, WALL THICKNESS NOT OVER 9.5MM
    Steel with critical mineral commodity alloying agent7304246030TUBING, SEAMLESS, OIL OR GAS DRILLING, STAINLESS STEEL, OUTSIDE DIAMETER NOT OVER 114.3MM, WALL THICKNESS OVER 9.5MM
    Steel with critical mineral commodity alloying agent7304246045TUBING, SEAMLESS, OIL OR GAS DRILLING, STAINLESS STEEL, OUTSIDE DIAMETER OVER 114.3MM BUT LESS THAN 215.9MM
    Steel with critical mineral commodity alloying agent7304246075TUBING, SEAMLESS, OIL OR GAS DRILLING, STAINLESS STEEL, OUTSIDE DIAMETER OVER 406.4MM
    Steel with critical mineral commodity alloying agent7304293130CASING, SEAMLESS, OIL OR GAS DRILLING, OTH ALLOY STEEL NOT STAINLESS, THREADED OR COUPLED, OUTSIDE DIA 215.9-285.8 MM WALL THICKNSS LESS THAN 12.7 MM
    Steel with critical mineral commodity alloying agent7304293180CASING, SEAMLESS, OIL OR GAS DRILLING, OF OTHER ALLOY STEEL, THREADED OR COULPED, OUTSIDE DIAMETER OVER 406.4 MM
    Steel with critical mineral commodity alloying agent7304294120CASING, SEAMLESS, OIL AND GAS DRILLING, OTH ALLOY STEEL NOT STAINLESS, NOT THREADED OR COUPLED, OUTSIDE DIA UNDER 215.9MM, WALL THICKNS 12.7MM OR MORE
    Steel with critical mineral commodity alloying agent7304294130CASING, SEAMLESS, OIL AND GAS DRILLING, OTH ALLOY STEEL NOT STAINLESS, NOT THREADED OR COUPLED, OUTSIDE DIA 215.9-285.8MM, WALL THICKNESS UNDER 12.7MM
    Steel with critical mineral commodity alloying agent7304294180CASING, SEAMLESS, OIL AND GAS DRILLING, OF OTHER ALLOY STEEL NOT STAINLESS, NOT THREADED OR COUPLED, OUTSIDE DIAMETER OVER 406.4MM
    Steel with critical mineral commodity alloying agent7304295015TUBING, SEAMLESS, OIL AND GAS DRILLING, IRON OR NONALLOY STEEL, OUTSIDE DIAMETER NOT OVER 114.3MM, WALL THICKNESS NOT OVER 9.5MM
    Steel with critical mineral commodity alloying agent7304296115TUBING, SEAMLESS, OIL OR GAS DRILLING, OF OTHER ALLOY STEEL NOT STAINLESS, OUTSIDE DIAMETER NOT OVER 114.3MM, WALL THICKNESS NOT OVER 9.5MM
    Steel with critical mineral commodity alloying agent7304296130TUBING, SEAMLESS, OIL OR GAS DRILLING, OF OTHER ALLOY STEEL NOT STAINLESS, OUTSIDE DIAMETER NOT OVER 114.3MM, WALL THICKNESS OVER 9.5MM
    Steel with critical mineral commodity alloying agent7304296145TUBING, SEAMLESS, OIL OR GAS DRILLING, OF OTHER ALLOY STEEL NOT STAINLESS, OUTSIDE DIAMETER OVER 114.3MM BUT LESS THAN 215.9MM
    Steel with critical mineral commodity alloying agent7304313000HOLLOW BARS, SEAMLESS, NESOI, OF IRON (OTHER THAN CAST IRON) OR NONALLOY STEEL, CIRCULAR CROSS SECTION, COLD-DRAWN OR COLD-ROLLED
    Steel with critical mineral commodity alloying agent7304390008OTH PIPES/TUBES/HOLLOW PROF., SEAMLESS, IRON/NONALLOY STEEL, NOT COLD-TREATED, CIRCULAR CROSS-SECTION FOR BOILERS, SUPRHTRS, OUTSIDE DIAM OVER 285.8MM
    Steel with critical mineral commodity alloying agent7304390016OTHER SEAMLESS TUBES, PIPES, HOLLOW PROFILES, IRON O NONALLOY STEEL, CIRCULAR CROSS SECTION, NT COLD-TREATED, GALVANIZED, OUTSIDE DIAM NT OVER 114.3MM
    Steel with critical mineral commodity alloying agent7304390020OTH PIPES/TUBES/HOLLOW PROF., SEAMLESS, IRON/NONALLOY STEEL, CIRCULAR CROSS-SECTION, NT COLD-TREATED, NT GALVANIZED, OUTSIDE DIAMETER LESS THAN 38.1MM
    Steel with critical mineral commodity alloying agent7304390028OTH PIPES/TUBES/HOLLOW PROF, SEAMLESS, IRON/NONALLOY STEEL, CIRC X-SECTION, NT COLD-TREATED, NT GALVANIZED, O/DIAM 38.1-114.3MM, WALLS 6.4-12.7MM THK
    Steel with critical mineral commodity alloying agent7304390032OTH PIPES/TUBES/HOLLOW PROF, SEAMLESS, IRON/NONALLOY STEEL, CIRC X-SECT, NT CLD-TREATED, NT GALVNZED, OUTSIDE DIAM 38.1-114.3MM, WALLS OVER 12.7MM THK
    Steel with critical mineral commodity alloying agent7304413005TUBES, PIPES AND HOLLOW PROFILES, SEAMLESS, CIRCULAR CROSS SECTION, HIGH-NICKEL STAINLESS STEEL,COLD-ROLLED OR DRAWN, EXTERNAL DIAMETER LESS THAN 19MM
    Steel with critical mineral commodity alloying agent7304413015TUBES, PIPES, HOLLOW PROFILES, SEAMLESS, CIRCULAR CRSS-SEC STAINLESS STEEL, COLD-ROLLED,FOR BOILERS,SUPERHEATERS, ETC, EXTERNAL DIAMETER UNDER 19MM
    Steel with critical mineral commodity alloying agent7304413045TUBES, PIPES, HOLLOW PROFILES, SEAMLESS, CIRCULAR CROSS-SECTION, STAINLESS STEEL, COLD-ROLLED, NESOI, EXTERNAL DIAMETER LESS THAN 19MM
    Steel with critical mineral commodity alloying agent7304416005TUBES, PIPES AND HOLLOW PROFILES, SEAMLESS, CIRCULAR CROSS SECTION, HIGH-NICKEL STAINLESS STEEL,COLD-ROLLED OR DRAWN,EXTERNAL DIAMETER 19MM OR MORE
    Steel with critical mineral commodity alloying agent7304416015TUBES, PIPES, HOLLOW PROFILES, SEAMLESS, CIRCULAR CROSS-SEC STAINLESS STEEL, COLD-ROLLED,FOR BOILERS, SUPERHEATERS,ETC, EXTERNAL DIAMETER 19MM OR MORE
    Steel with critical mineral commodity alloying agent7304416045TUBES, PIPES, HOLLOW PROFILES, SEAMLESS, CIRCULAR CROSS-SECTION, STAINLESS STEEL, COLD-ROLLED, NESOI, EXTERNAL DIAMETER 19MM OR MORE
    Steel with critical mineral commodity alloying agent7304490005TUBES, PIPES AND HOLLOW PROFILES, SEAMLESS, CIRCULAR CROSS SECTION OF HIGH-NICKEL STAINLESS STEEL, NOT COLD-DRAWN OR COLD-ROLLED
    Steel with critical mineral commodity alloying agent7304490015HOLLOW BARS OF STAINLESS STEEL, SEAMLESS, CIRCULAR CROSS SECTION, NESOI, NOT COLD-DRAWN OR COLD-ROLLED
    Steel with critical mineral commodity alloying agent7304490045TUBES, PIPES AND HOLLOW PROFILES, SEAMLESS, CIRC CS OF STAINLESS STEEL, NOT COLD-ROLLED, NOT HOLLOW BARS, SUITABLE FOR USE IN BOILERS, SUPERHEATERS ET
    Steel with critical mineral commodity alloying agent7304490060TUBES, PIPES AND HOLLOW PROFILES, SEAMLESS, NESOI, CIRC CS OF STAINLESS STEEL, NOT COLD-ROLLED, NOT HOLLOW BARS, NOT SUITABLE FOR USE IN BOILERS, ETC
    Steel with critical mineral commodity alloying agent7304515005TUBES, PIPES AND HOLLOW PROFILES, SEAMLESS, CIRCULAR CROSS SECTION OF HIGH-NICKEL ALLOY STEEL, NESOI, COLD-DRAWN OR COLD-ROLLED
    Steel with critical mineral commodity alloying agent7304515015TUBES, PIPES AND HOLLOW PROFILES, SEAMLESS, CIRC CS, NESOI, COLD-DRAWN OR COLD-ROLLED OF HEAT RESISTING STEEL, SUITABLE FOR USE IN BOILERS, ETC
    Steel with critical mineral commodity alloying agent7304515045TUBES PIPES AND HOLLOW PROFILES, SEAMLESS, CIRC CS COLD-DRAWN OF ALLOY STEEL, NOT STAINLS STL, SUITABLE FOR USE IN BOILRS ETC NOT OF HEAT RESISTING ST
    Steel with critical mineral commodity alloying agent7304515060TUBES, PIPES, ETC, SEAMLESS, CIRC CS, COLD-ROLLED ALLOY STEEL, NOT STAINLESS STEEL, NOT SUITABLE FOR USE IN BOILERS ETC OR FOR BALL BEARINGS
    Steel with critical mineral commodity alloying agent7304901000TUBES, PIPES AND HOLLOW PROFILES, SMLS, NESOI, OF NONCIRC CS W WALL THICKNESS 4MM OR MR, OF IRON OR NONALLOY STEEL
    Steel with critical mineral commodity alloying agent7304903000TUBES, PIPES AND HOLLOW PROFILES, SEAMLESS, NESOI, OF NONCIRC CRS SECTION W WALL THICKNESS 4MM OR MOR OF ALLOY STEEL
    Steel with critical mineral commodity alloying agent7304905000TUBES, PIPES AND HOLLOW PROFILES, SEAMLESS, NESOI, OF NONCIRCULAR CROSS SECTION, W WALL THICKNESS LESS THN 4MM, OF IRON OR NONALLOY STEEL
    Steel with critical mineral commodity alloying agent7304907000TUBES, PIPES AND HOLLOW PROFILES, SEAMLESS, NESOI, OF NONCIRCULAR CROSS SECTION, W WALL THICKNESS LESS THN 4MM, OF ALLOY STEEL
    Steel with critical mineral commodity alloying agent7305111030LINE PIPE FOR OIL/GAS PIPELINE,LONGITUDINALLY SUBMERGED ARC WELDED WITH EXTERNAL DIAMETER OVER 406.4MM-609.6MM,IRON/NONALLOY STEEL,CIRCULAR X-SECTION
    Steel with critical mineral commodity alloying agent7305111060LINE PIPE FOR OIL/GAS PIPELINES, LONGITUDINALLY SUBMERGED ARC WELDED WITH EXTERNAL DIAMETER OVER 609.6MM, IRON/NONALLOY STEEL, CIRCULAR CROSS-SECTION
    Steel with critical mineral commodity alloying agent7305115000LINE PIPE FOR OIL/GAS PIPELINES, LONGITUDINALLY SUBMERGED ARC WELDED WITH EXTERNAL DIAMETER OVER 406.4MM, OF ALLOY STEEL, WITH CIRCULAR CROSS-SECTION
    Steel with critical mineral commodity alloying agent7305121030LINE PIPE FOR OIL/GAS PIPLINES, LONGITUDINALLY WELDED WITH EXTERNAL DIAMETER OVER 406.4MM BUT NOT OVER 609.6MM,IRON/NONALLOY STEEL,CIRCULAR CROSS SECT
    Steel with critical mineral commodity alloying agent7305121060LINE PIPE FOR OIL/GAS PIPELINES, LONGITUDINALLY WELDED WITH EXTERNAL DIAMETER OVER 609.6MM, OF IRON OR NONALLOY STEEL, WITH CIRCULAR CROSS-SECTION
    Steel with critical mineral commodity alloying agent7305125000LINE PIPE FOR OIL OR GAS PIPELINES, LONGITUDINALLY WELDED WITH EXTERNAL DIAMETER >406.4MM, OF ALLOY STEEL, WITH CIRCULAR CROSS SECTION
    Steel with critical mineral commodity alloying agent7305191060LINE PIPE FOR OIL/GAS PIPELINES, WITH EXTERNAL DIAMETER EXCEEDING 609.6MM, OF IRON OR NONALLOY STEEL, WITH CIRCULAR CROSS-SECTION, NESOI
    Steel with critical mineral commodity alloying agent7305195000LINE PIPE FOR OIL OR GAS PIPELINES, WITH EXTERNAL DIAMETER >406.4MM, OF ALLOY STEEL, CIRCULAR CROSS SECTION, WELDED/RIVETED, NESOI
    Steel with critical mineral commodity alloying agent7305204000CASING OF A KIND USED IN DRILLING FOR OIL OR GAS, OF IRON OR NONALLOY STEEL, WITH EXTERNAL DIAMETER OVER 406.4MM, CIRCULAR CROSS-SECTION, NESOI
    Steel with critical mineral commodity alloying agent7305208000CASING OF A KIND USED IN DRILLING FOR OIL OR GAS, OF ALLOY STEEL, WITH EXTERNAL DIAMETER OVER 406.4MM, CIRCULAR CROSS-SECTION, NESOI
    Steel with critical mineral commodity alloying agent7305314000OTHER TUBES AND PIPES (EXC OIL/GAS LINEPIPE OR CASING) LONGITUDINALLYWELDED, OF IRON OR NONALLOY STEEL
    Steel with critical mineral commodity alloying agent7305316010TUBES AND PIPES OF STAINLESS STEEL, LONGITUDINALLY WELDED, HAVING CIRCULAR CROSS SECTIONS, THE EXTERNAL DIAMETER OF WHICH EXCEEDS 406.4 MM, NESOI
    Steel with critical mineral commodity alloying agent7305905000OTHER TUBES AND PIPES NESOI, RIVETED OR SIMILARLY CLOSED, NOT WELDED, OF ALLOY STEEL, CIRCULAR CRS SEC, EXT DIAM OVER 406.4 MM, NT OIL LINPIP OR CASNG
    Steel with critical mineral commodity alloying agent7306110010LINEPIPE FOR OIL/GAS PIPELINES, WELDED, OF STAINLESS STEEL, DIAMETER NOT OVER 114.3 MM, NESOI
    Steel with critical mineral commodity alloying agent7306110050LINEPIPE FOR OIL/GAS PIPELINES, WELDED, OF STAINLESS STEEL, DIAMETER OVER 114.3 MM
    Steel with critical mineral commodity alloying agent7306191010LINEPIPE FOR OIL/GAS PIPELINES, IRON/NONALLOY STEEL, DIAMETER NOT OVER 114.3 MM, NESOI
    Steel with critical mineral commodity alloying agent7306191050LINEPIPE FOR OIL/GAS PIPELINES, IRON OR NONALLOY STEEL, DIAMETER OVER 114.3 MM, NESOI
    Steel with critical mineral commodity alloying agent7306195150LINEPIPE FOR OIL/GAS PIPELINES, OF OTHER ALLOY STEEL NOT STAINLESS, DIAMETER OVER 114.3 MM, NESOI
    Steel with critical mineral commodity alloying agent7306214000OIL WELL CASING, WELDED OF STAINLESS STEEL, NOT THREADED OR COUPLED
    Steel with critical mineral commodity alloying agent7306218050OIL WELL TUBING, WELDED OF STAINLESS STEEL, NOT IMPORTED WITH COUPLING
    Steel with critical mineral commodity alloying agent7306291030OIL WELL CASING NESOI OF IRON OR NONALLOY STEEL, IMPORTED WITH COUPLING, NOT SEAMLESS
    Steel with critical mineral commodity alloying agent7306291090OIL WELL CASING NESOI, OF IRON OR NONALLOY STEEL, THREADED, NOT IMPORTED WITH COUPLING, NOT SEAMLESS
    Steel with critical mineral commodity alloying agent7306292000OIL WELL CASING, NOT SEAMLESS, NESOI, OF IRON OR NONALLOY STEEL, NOT THREADED OR COUPLED
    Steel with critical mineral commodity alloying agent7306294100OIL WELL CASING, OF OTHER ALLOY STEEL NOT STAINLESS, NOT THREADED OR COUPLED
    Steel with critical mineral commodity alloying agent7306296010OIL WELL TUBING, NOT SEAMLESS, NESOI, OF IRON OR NONALLOY STEEL, IMPORTED WITH COUPLING
    Steel with critical mineral commodity alloying agent7306296050OIL WELL TUBING, NOT SEAMLESS, NESOI, OF IRON OR NONALLOY STEEL, NOT IMPORTED WITH COUPLING
    Steel with critical mineral commodity alloying agent7306298150OIL WELL TUBING, OF OTHER ALLOY STEEL NOT STAINLESS, NOT IMPORTED WITH COUPLING
    Beryllium7405006030Beryllium Copper Master Alloy (kg)
    Beryllium7409901030Beryllium Cu Pl Sh Str 5 mm Or More Thick (kg)
    Beryllium7409905030Beryllium Cu Pl Sh St Un 5 mm Th 500 mm A Ov Wide (kg)
    Beryllium7409909030Beryl Cu Pl Sht Str Un 5 mm Th Un 500 mm Wide (kg)
    Nickel7501100000Nickel Mattes (kg)
    Nickel7501200000Ni Ox Sntrs A Oth Int Prds Of Ni Mtllrgy (kg)
    Nickel7502100000Nickel, Unwrought, Not Alloyed (kg)
    Nickel7502200000UNWROUGHT NICKEL ALLOYS
    Nickel7503000000Nickel Waste And Scrap (kg)
    Nickel7504000010Nickel Powders (kg)
    Nickel7504000050Nickel Flakes (kg)
    Aluminum7601103000Unw Al Nal Lst C-s Dim Nt Gr Th 9.5MM In Coils (kg)
    Aluminum7601106030Unwrought Aluminum Not Alloyed, Gt 99.8% Aluminum (kg)
    Aluminum7601106090Unwrought Aluminum Not Alloyed, Nesoi (kg)
    Aluminum7601203000Unw Alm Aly Lst Cs Dim Nt Gr Th 9.5MM (kg)
    Aluminum7601206000Oth Unwrt Almn Al Cnt At Lst 25 Pc Silicon (kg)
    Aluminum7601209030Unwrought Aluminum Vanadium Master Alloy (kg)
    Aluminum7601209045Oth Unw Al Alloy Of Unifm C-s Thru It Lnth Nt Coil (kg)
    Aluminum7601209075Alum Al Remlt Scrp Ingt (kg)
    Aluminum7601209080Aluminum Alloy, Sheet Ingot, Stat Note 3 (kg)
    Aluminum7601209085Aluminum Alloy, Foundry Ingot, Stat Note 4 (kg)
    Aluminum7601209095Aluminum Alloy, Unwrought, Nesoi (kg)
    Aluminum7603100000Aluminum Powders Of Non-lamellar Structure (kg)
    Aluminum7603200000Aluminum Powders Of Lamellar Structure, Flakes (kg)
    Aluminum7604101000Aluminum Profiles Not Alloyed (kg)
    Aluminum7604103000Al Bar, Rod, Nt Alloy Having Round Cross Section (kg)
    Aluminum7604105000Al Br-rd Nt Alloy Other Than Round Cross Section (kg)
    Aluminum7604293060Alum Aly Br-rd Ha Rd C-s, Ht-trtbl,indstrl Alloys (kg) of a kind described in statistical note 7 to this chapter
    Aluminum7604293090Aluminum Alloy Bar-rod Hav Round Crs-sectn, Nesoi (kg)
    Aluminum7604295020Alum Aly Br-rd Ot Th Rd C-s,hi-str Ht-trtbl Alloy (kg) of a kind described in statistical note 7 to this chapter
    Aluminum7604295050Aluminum Alloy Ha Ot Th Rd C-s,ht-trt Indus Alloy (kg) of a kind described in statistical note 7 to this chapter
    Aluminum7604295090Aluminum Alloy, Bar/rod Oth Than Round C-s, Nesoi (kg)
    Aluminum7606113030Alum Plt Sht Strp Rec/sq Nal Nt Cld Ov 6.3MM Thck (kg)
    Aluminum7606113060Alum Plt Sht Strp Rec/sq Nal Nt Cl Ov.2-6.3mm Thk (kg)
    Aluminum7606116000Alum Plt Sht Strp Rec O Sqr Nt Aly Clad Ov .2mm Th (kg)
    Aluminum7606123015Alum Plt Sht Strp Rec Sqr Nt Cl Ov 6.3MM Hs Ht Al (kg)
    Aluminum7606123025Alum Plt Rec Sqr Nt Cl Ov 6.3MM Thk,indus Aly (kg) of a kind described in statistical note 7 to this chapter
    Aluminum7606123035Alum Plt Rec Sqr Aly Nt Cl Ov 6.3MM Thk, Nesoi (kg)
    Aluminum7606126000Al Pla She A Str Rec In Sq Alloy Clad Ov 0.2MM Thk (kg)
    Steel with critical mineral commodity alloying agent7614101000STRANDED WIRE, CABLES, PLAITED BANDS A SMLR, WITH STEEL CORE NOT FITTED WITH FITTINGS AND NOT MADE UP INTO ARTICLES
    Steel with critical mineral commodity alloying agent7614105000STRANDED WIRE,CABLES, PLAITED BANDS A SMLR, WITH STEEL CORE FITTED WITH FITTINGS OR MADE UP INTO ARTICLES
    Steel with critical mineral commodity alloying agent7614904000OTHER ALUMINUM STRANDED WIRE CABLES, PLAITED AND SIMILAR, W/O STEEL CORE, NOT FITTED WITH FITTINGS AND NOT MADE UP INTO ARTICLES
    Steel with critical mineral commodity alloying agent7614905000STRANDED WIRE, CABLES, PLAITED BANDS A SMLR, W/O STEEL CORE, FITTED WITH FITTINGS OR MADE UP INTO ARTICLES
    Antimony7801910000Lead Unwrought Containing By Weight Antimony As The Principal Other Element
    Zinc7901110000Zinc Unwrt Nt Aly Cnt Wgt At Lst 99.99 Percnt Zinc (kg)
    Zinc7901121000Znc Unw Nt Allyd Casting Grade Un 99.99 Pc Zinc (kg)
    Zinc7901125000Zinc Unwr Nt Allyd Und 99.99 Pc Znc (kg)
    Zinc7901200000ZINC ALLOYS, UNWROUGHT
    Zinc7902000000Zinc Waste And Scrap (kg)
    Zinc7903100000Zinc Dust (kg)
    Zinc7903903000Zinc Powders (kg)
    Zinc7903906000Zinc Flakes (kg)
    Tin8001100000Tin, Unwrought, Not Alloyed (kg)
    Tin8001200010TIN ALLOYS UNWROUGHT CONTAINING BY WEIGHT 5 PERCENT OR LESS LEAD
    Tin8001200050TIN AL UNWR CNTG X WGHT 5 PERCNT BUT NOT OVER 25 PERCNT OF LEAD
    Tin8001200090TIN AL UNWR CNTG X WGHT 25 PERCNT OR MORE OF LEAD
    Tin8007003200Tin Powders And Flakes (kg)
    Tungsten8101100000Tungsten (wolfram) Powders (kg)
    Tungsten8101940000Tungsten, Unwrought (kg)
    Tungsten8101970000Tungsten Waste And Scrap (kg)
    Tungsten8101991000Tungstn Brs, Rds (exc Sintrd),profl Plt Sht Stp Fl (kg)
    Tantalum8103200030Tantalum Powders (kg)
    Tantalum8103200090Tantalum Unwrought, Incld Brs And Rds Nesoi (kg)
    Tantalum8103300000Tantalum Waste And Scrap (kg)
    Tantalum8103910000CRUCIBLES OF TANTALUM
    Tantalum8103990000ARTICLES OF TANTALUM, NESOI
    Magnesium8104110000Unwrght Magsium Cont 99.8 Pct By Wght Of Magsium (kg)
    Magnesium8104190000Magnesium, Other, Nesoi, Unwrought (kg)
    Magnesium8104200000Magnesium Waste And Scrap (kg)
    Magnesium8104300000Magnsm Rspgs, Trngs A Grnls, Grd To Sz; Pwdrs (kg)
    Magnesium8104900000Magnesium, Wrought (kg)
    Cobalt8105203000Unwrought Cobalt Alloys (kg)
    Cobalt8105206000Unwrought Cobalt Exc Alloys, Incl Powders (kg)
    Cobalt8105209000Unwrought Cobalt Exc Alloys, Incl Powders (kg)
    Cobalt8105300000Cobalt Wst, Scrp, Intr Prds Cbl Mtlrg (kg)
    Cobalt8105900000COBALT, WROUGHT, AND ARTICLES THEREOF
    Bismuth8106100000BISMUTH AND ARTICLES THEREOF CONTAINING MORE THAN 99.99% BISMUTH, BY WEIGHT
    Bismuth8106900000BISMUTH AND ARTICLES THEREOF, INCLUDING WASTE AND SCRAP, NESOI
    Titanium8108200010Sponge, Titanium (kg)
    Titanium8108200015Titanium Powders (kg)
    Titanium8108200030Ingots, Titanium (kg)
    Titanium8108200095Unwrought Titanium, Nesoi (kg)
    Titanium8108300000Titanium Waste And Scrap
    Titanium8108903030TITANIUM CASTINGS
    Titanium8108903060OTHER ARTICLES OF TITANIUM, NESOI
    Titanium8108906020Blooms, Sheet Bars And Slabs Of Titanium (kg)
    Titanium8108906031Bars, Rods, Profiles And Wire Of Titanium, Nesoi (kg)
    Titanium8108906045Plates, Sheets, Strips And Foil, Titanium (kg)
    Titanium8108906060Tubes And Pipes, Titanium (kg)
    Titanium8108906075Other Wrought Titanium, Nesoi (kg)
    Antimony8110100000Unwrought Antimony; Powders (kg)
    Antimony8110200000Antimony Waste And Scrap (kg)
    Antimony8110900000Antimony And Artcls Thereof,nesoi (kg)
    Manganese8111003000Manganese Waste And Scrap (kg)
    Manganese8111004700Unwrought Manganese Flake At Least 99.5% By Wt Mn (kg)
    Manganese8111004910Unwrought Mang,powder Cont At Least 99.5% Manganes (kg)
    Manganese8111004990Unwrought Manganese, Nesoi (kg)
    Manganese8111006000Other Manganese, Nesoi, Wrought (kg)
    Beryllium8112120000Other Unwrought Beryllium; Beryllium Powders (kg)
    Beryllium8112130000Beryllium Waste And Scrap (kg)
    Beryllium8112190000Other Beryllium, Wrought, And Articles, Thereof Ne (kg)
    Chromium8112210000Unwrought Chromium; Powders (kg)
    Chromium8112220000Chromium Waste And Scrap
    Chromium8112290000Chromium And Articles Thereof, Nesoi (kg)
    Hafnium8112310000unwrought hafnium incl powders
    Hafnium8112390000hafnium and articles thereof, nesoi
    Germanium8112920700Germanium Waste And Scrap (kg)
    Gallium8112921000Unwrought Gallium Incl Powders (kg)
    Indium8112923000Unwrought Indium Incl Powders (kg)
    Niobium8112924000Unwrought Niobium (columbium) Inc Powders (kg)
    Germanium8112926000Germanium Unwrought (kg)
    Germanium8112926500Germanium Powder (kg)
    Vanadium8112927000Vanadium, In Powder & Oth Unwrgt Forms, Nt Wst&scp (kg)
    Germanium8112991000Wrought Germanium, And Articles Thereof Nesoi (kg)
    Vanadium8112992000VANADIUM AND ARTICLES THEREOF, WROUGHT, WASTE AND SCRAP, POWDERS, NESOI
    Rare earths/Cobalt8505110050sintered samarium-cobalt, permanent magnets and articles intended to become permanent magnets after magnetization
    Rare earths8505110070sintered neodymium-iron-boron permanent magnets and articles intended to become permanent magnets after magnetization
    Graphite8545110010Graphite Electrodes Diameter Lt=425mm For Furnaces (kg)
    Graphite8545110020Graphite Electrodes Diameter Gt 425mm For Furnaces (kg)
    Graphite8545110050Carbon Electrodes Of Kind Used For Furnaces Nesoi (kg)
    Graphite8545200000Electrical Carbon Or Graphite Brushes (kg)
    Graphite8545904000Graphite/carbon Articles, For Elec Purpose, Nesoi (kg)

    Leave a Reply

    Related articles

    Discover more from Trade Compliance Nerd

    Subscribe now to keep reading and get access to the full archive.

    Continue reading